LED Retrofit Kit for Pole Mounted Work Lights - Convert HID to LED light heads - (3) 25 Watt LEDs

LARSON ELECTRONICSSKU: PL3-LLP-FRSTRM-RETRO-3X25WRE
filler

Price:
Sale price$1,682.99

Description

Specifications / Additional Information
LLP-FRSTRM-RETRO-3X25WRE Summary/Certifications
Lamp Type: CREE LED Fast average current control
Lamp Qty: 3 Programmable off-time switching
Dimensions: Linear dimming input
Weight Short Protection w/ Skip Mode
Voltage: 12-32 V DC Ambient Op Temp -40C to +85C
Total Wattage: 75 Watts Pin-compatible with the HV9910B
Single Lamp Wattage: 25 Watts CE Certified
Total Lumens: 8,250
Single Lamp Lumens: 2,750
Lighting Configuration: 10° Spot & 60° Flood Combined
LED Light Color: 6000K
LED Life Expectancy: 50,000 hours
Amperage: 6.24 @ 12V DC - 3.12 @ 24V DC
Weather Rating:  Weatherproof
Lamp Materials: Aluminum Housing, Polycarbonate Lens Toll Free: 1-800-369-6671
Mounting: LED Retrofit Kit Intl: 1-903-270-1187
Wiring: 16 AWG Straight Cord E-mail: 
' Product Overview '
LED Retrofit Kit for Pole Mounted Work Lights - Convert from HID to LED light heads This LED retrofit kit features three LED25WRE light heads to replace three existing HID light heads. This retrofit kit includes a waterproof on/off switch, CNC machined aluminum switch mounting plate, and internal wiring to operate the LED lights. The LED lights draw 25 watts each and produce 2,750 lumens, for a combined total of 75 watts and 8,250 lumens for this retrofit kit. The light heads are universal voltage and operate on 12-32V DC. The LED WRE series LED lights are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The low profile design, low power requirements, high durability and versatile mounting makes these LED lights ideal for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, off-roading and commercial structure illumination. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Voltage: These units are also able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP WRE series LED lights can operate on current ranging from 12 to 32VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it. Durability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.
 

Shipping and delivery Information

Payment

American Express Apple Pay Bitcoin Bitcoin Cash DAI Diners Club Discover Dogecoin Ethereum Google Pay Litecoin Mastercard PayPal Shop Pay USDC Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed