|LM-12-4.5-5S-FM-EW - 12` Five Stage Telescoping Light Tower||Quick Summary|
|Length: Telescoping from 4.5` to 12`||4.5` to 12` Foot Light Mast|
|Weight: +-150 lbs||Steel Construction|
|Capacity: 125 lbs||Power Coated Finish|
|Materials: Steel||Removable Mast Head|
|Finish: Powder Coated - Gloss Blue||125 mph Wind Resistance|
|Operation: (1) 1,000lbs Electric Winch, Manual Optional||Electric Operation|
|Cable: 3/16" Aircraft Cable||UL 508A|
|Mounting: 1/4" thick, 13"x15" Base Plate|
|Anchor Bolts: (6) 9/16" Bolts|
|Winch Voltage: 120V or 240V AC 50/60 Hz|
|Shipping: Common Freight||Toll Free: 1-800-369-6671|
|Shipping Dimensions: 8`-L x 4`-W x 5`-H||Intl: 1-214-616-6180|
|Shipping Weight: +-375 lbs|
|Options: Length- Mounting-Fixtures/ Call Us for Special Requirements|
|Made in the USA The Larson Electronics LM-12-4.5-5S-FM-EW fixed mount 5-stage electric light mast provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations of up to twelve feet. This light tower folds over for easy transportation, features a rotating boom that allows for 360° of rotation, electric winch, and a removable mast head for storing mounted equipment when not in use. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This telescoping five stage steel light mast from Larson Electronics is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 12` for effective coverage. The tower is constructed of square steel tubing with a base stage 3.04` in length and 7" by 7" by 1/4" thick, fourth stage 3.23` in length and 5" by 5" by 3/16" thick, third stage 3.42` and 4" by 4" by 1/8" thick, second stage 3.6` and 3" by 3" by 1/8" thick and a top stage 3.77` and 2" by 2" by 1/8" thick. Each section has a 2` minimum overlap. The mast is elevated by pressing down on the end of base stage, elevating the mast into the upright position. The mast is extended to its full height using an included 1,000 lbs hand winch with 3/16" galvanized cable.|
|The LM EW series of light masts from Larson Electronics features an electric winch setup to raise and lower the light mast. A NEMA 3R control box mounted at the base of the light mast houses the controls for power and up and down motions. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. These light masts are typically mounted to trailers or other stable surfaces via a 15" by 13" by 1/4" thick mounting base-plate which has been drilled to accept six 9/16" anchor bolts. A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for light fixtures and equipment. The LM family of telescoping towers feature a proprietary mast guidance system, which provides increased stability during high winds. When lowered to 6.5`, the mast can withstand winds up to 125 mph. When elevated to its full upright position, the mast can be rotated a full 360°. By loosening the T-Handle, operators can rotate the mast with ease in either direction. The mast can be positioned in one of four different directions, and locked back in place by re-tightening the T-handle. The mast itself spins freely, and can typically be rotated with a single hand. The electric winch on this mast is offered in 120V or 240V AC 50/60 HZ. Additional voltage options are available at an additional charge. Larson Electronics can offer single phase and three phase AC winches, or low voltage DC winches. This light tower weighs approximately 150 lbs and can easily support and lift 125 lbs fixtures. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 8` long, 4` wide, 5` tall and weighs approximately 375 lbs. Larson Electronics can custom tailor these units to the customer’s requirements with longer sections and larger mounting plates. We also offer a choice of either the manual 1,000 lbs hand winches included standard or optional electric winches. Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the , , or .|
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.