15' Four Stage Telescoping Mini Light Mast w/ 480 Watt LED Light - 5' to 15' Light Boom - Stationary
15' Four Stage Telescoping Mini Light Mast w/ 480 Watt LED Light - 5' to 15' Light Boom - Stationary
LM-15-5-4S-400W-LED 15ft Four Stage Telescoping Light Tower | Quick Summary |
Lamp Type:Â Cree LED | Mast Summary |
Lamps: 400 Watt LED Fixture | 5` to 15` Foot Light Mast |
Total Watts: 400 | Steel Construction |
Total Lumens:Â 54,000 | Power Coated Finish |
Mast Length: 5 feet - 15 feet | Removable Mast Head |
Capacity: 100 lbs | 125 mph Wind Resistance |
Materials: Steel | Electric Operation |
Finish: Powder Coated - Gloss Blue | Â |
Operation: 600lbs Manual Winch | LED Lamp Head Summary |
Cable: 3/16" Galvanized Aircraft Cable | 135 Lumens Per Watt Efficiency |
Mounting: 1/4" thick, 13"x15" Six Bolt Hole Bracket | 80,000+ Lamp Life |
Weight: ~200 lbs | Corrosion Resistant Aluminum Housing |
Shipping: Common Freight | Multiple LED Banks for Heat Dispersion |
 | 98% Transmission High Purity PMMA Optics |
Lamp Specs | |
Lamp Type: LED | Â |
Voltage:Â Universal 100-277 VAC, 50/60Hz | |
Lighting Configuration: 10° Spot, 25° Wide Spot, 40° Narrow Flood, 60° Flood, or 90° Wide Flood | |
Luminous Efficiency: 135 lm/w | Toll Free:Â 1-800-369-6671 |
Color Temp: 5600K, 70-CRI | |
Lamp Life: 80,000+ Hours | Fax:Â 1-903-498-3364 |
Options:Â Length- Mounting-Fixtures/ Call Us for Special Requirements | E-mail:Â |
The customer ships the failed light mast to Larson Electronics at their expense. If the failure is a manufacturer defect, we will repair and/or replace the unit. |
This unit is Made In USA - Manufactured in Texas The Larson Electronics LM-15-5-4S-400W-LED fold over 4-stage light mast provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations of up to fifteen feet. This light tower features a rotating boom that allows for 360° of rotation and a removable mast head for storing mounted equipment when not in use. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This telescoping four stage steel light mast from Larson Electronics’ is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 15 feet for effective coverage. This light boom can be extended to 15 feet for maximum area coverage and collapsed to 5 feet for applications where a smaller footprint is required. The tower is constructed of square steel tubing with a base section 3.35` in length and 5" x 5" by 1/8" thick, lower section 3.45` in length and 4" x 4" by 1/8" thick, an upper section 3.65` in length and 3" x 3" by 1/8" thick, and a top section 4.19` in length and 2" x 2" by 1/8" thick. Each section has a 12" overlap. The mast is extended to its full height using an included 600 lbs hand winch with 3/16" galvenized cable. Included with this light tower is one of our wet area suitable high output LED fixtures producing a combined total of approximately 54,000 lumens at 400 watts. The light head contains forty-eight Cree® high output LEDs producing 1125 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. The lamps are connected to the power source via a water tight male pin connector that attaches to a receptacle located on the end of the telescoping boom. | |||||||||
|
|||||||||
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.
Durability: As well as unparalleled heat control, the GAU-LTL-400W-LED series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree® LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Light Mounting: Each unit is equipped with a back mount trunnion style mounting bracket that allows the light to be attached to flat surfaces and adjusted through 160° of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
|
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
Share
