|LM-16-FM-2X1500W-EW 3000W Electric Stationary Mast||Quick Summary|
|Length: 10` to 16`Â||10-16 Ft Extendable Mast|
|Weight: 300 lbs||Steel Construction|
|Capacity: 150 lbs||125 mph Wind Resistance|
|Materials: Steel||Manual or Optional Electric Operation|
|Operation:Â 1,000lbs Electric Winch||Lights- UL 1572 & Wet Area Suitable|
|Mounting: 1/2" thick, 13x15"Â Six HoleÂ Bracket||UL 508A|
|Winch Voltage: 120V or 240V AC 50/60 Hz|
|Shipping: Common Freight|
|Shipping Weight: 380 lbs|
|Options: Length- Mounting-Fixtures/ Call Us for Special Requirements||Toll Free:Â 1-800-369-6671|
|Made in the USA The LM-16-FM-2X1500W-EW Electric Operation Fixed Mount Light Tower from Larson Electronics is a 16 foot extendable light tower equipped with an electric winch and twoÂ metal halide light fixtures producing approximately 300,000 lumens combined. The two 1,500 watt metal halide lamps produce a wide spread of intense white light, allowing this unit to effectively cover large work areas with high quality illumination. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* The Larson Electronics' LM-16-FM-2X1500W-EW telescoping steel light tower allows operators to quickly and safely deploy 3,000 watts of intense lighting in locations where elevated illumination is needed for maximum area coverage. This two section light boom can be extended to 16 feet for maximum area coverage and collapsed to 10 feet where a footprint smaller than 10 feet is required. The tower is constructed of square steel tubing with a lower section 10 feet in length and 4 inches in diameter and an upper section 8 feet in length and 3 inches in diameter with a 1 foot overlap. The mast is extended to its full height using an included 1,000 pound rated 120 volt Dutton Lainson electric winch with 3/16 inch aircraft cable. The electric winches are controlled via a programmable logic relay and reflective sensors as opposed to physical limit switches for ease of use and safety.Â The control system is encapsulated in a NEMA 3R enclosure and includes movement buttons, warning alarms and an emergency stop button.Â We use off the shelf components and the system is designed for field maintenance if needed.Â The electric winch on this mast is offered in 120V or 240V AC 50/60 HZ. Additional voltage options are available at an additional charge. Larson Electronics can offer single phase and three phase AC winches, or low voltage DC winches. It takes approximately 1-2 minutes to elevate the mast to its height.Â The tower alone reaches 16 feet and the total height of this tower including the metal halide lamps is 18.5 feet.|
|Included with this light tower are two of our wet area suitable metal halide fixtures producingÂ approximately 150,000 lumens each, for a combined total of 300,000 lumensÂ at 3,000 watts. These lamps have 19â€ reflectors and are constructed of aluminum with a clear tempered glass lens which is secured into place with a heavy duty gasket and single ring lock. These floodlights produce a wide flood light pattern capable of illuminating approximately 3.5 acres. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. The lamps are connected to the power source via a water tight male pin connector that attaches to a receptacle located on the end of the telescoping boom. These light masts are typically mounted to trailers or other stable surfaces via a 15 inch by 13 inch, 1/2 inch thick mounting base-plate which has been drilled to accept six 3/4 inch anchor bolts. A 24 inch wide and 1/4 inch thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for the four metal halide fixtures. This light tower when lowered toÂ 10 feet can withstand winds up to 125 mph. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power. We also offer a choice of either the manual 1,000 lbs hand winches included standard or optional electric winches. Call us at 1-800-369-6671 or contact us at to discuss any special custom ordering requirements. Suggested Applications: Construction sites, event lighting, emergency services, highway projects, industrial plants, mining and excavation and anywhere a mobile light source with large area coverage capability is needed.|
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.