Options: Length- Mounting-Fixtures/ Call Us for Special Requirements
'
Product Overview
'
This unit is Made In USA - Manufactured in Texas
The Larson Electronics
LM-20-3S-ATM-TLR-DGP-3KW portable communication tower is a cell on wheels that provides
a quick way for operators to deploy equipment for mobile communication
operations. This unit features a heavy-duty mast that can be elevated to 20 feet
and an antenna mount pole (located at the top of the tower). Equipped with a 3kW diesel generator, the entire assembly
is mounted onto a 14' single axle trailer, allowing operators to transport this
unit (folded over) from location to location.
*PLEASE NOTE: ANY FREE SHIPPING
OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*
The
LM-20-3S-ATM-TLR-DGP-3KW is designed to allow operators to quickly and safely deploy
mobile communication systems in temporary locations and remote sites. The tower with a diesel generator
can be extended to 20 feet for effective coverage. This light boom can be extended to 20 feet for maximum area coverage and collapsed to 12 feet for applications where a footprint smaller is required. The tower is constructed of square steel tubing with a lower section 12 feet in length and 4 inches in diameter, a middle section 8 feet in length and 3.5 inches in diameter, and an upper section 6 feet and 3 inches in diameter. Each section has 2' of overlap. The mast is elevated using an included 1,000 lbs. hand winch with 3/16 inch cable and extended to its full height using a second 1,000 lbs. winch.
This
cell on wheels comes with an antenna mount pole (OD 2") at the top of the tower.
Operators may use the trailer to store communication devices and other
supporting equipment, such as cables, electronics, amplifiers, monitoring
systems, cameras, handheld tools, lights and more.
Click Image to Enlarge
Click Image to Enlarge
Click Image to Enlarge
The
LM series of towers are powder coated with glossy blue finish for corrosion
resistances and aesthetics. This portable communication tower is mounted to
a 14' by 6', single axle trailer via six 1/2" anchor bolts. The two wheel
trailer is equipped with 5,4000 lbs axle and leaf springs with 15"
trailer tires. The trailer can support and haul an additional 3,500 lbs of
equipment. A standard 2" ball coupling, two standard safety chains, and 4-pin
flat trailer plug allow for easy hookup and towing.
The LM family of telescoping towers
feature a proprietary mast guidance system, which provide increased stability
during high winds. Four 1,000 lbs hand crank leveling jacks are used for
leveling. The jacks can be leveled by hand crank or attachment provided for
power drills. These outriggers can be extended 2' out from the side of the
trailer for added stability. When lowered to 13.5', the mast can withstand winds
up to 125 mph. Custom builds can be provided for higher wind speed resistance
when fully raised.
Retractable outriggers with 1,000 lb manual
crank jacks and tail lights.
Manual 1,000 lb hand crank winch for
elevating and folding over the light mast on the LM-30-3S-ATM-TLR.
Mast support bracket for securing the mast
boom in the fold-over position during transportation.
Click Image to Enlarge
Click Image to Enlarge
Click Image to Enlarge
The LM-30-3S-ATM-TLR fitted with four
HID-22-SL-REM 1000 Watt Metal Halide Light Fixtures
Ready to Ship
The LM-30-3S-ATM-TLR fitted with four EPL-HB-150LED-RT 150 Watt
Explosion Proof LED Light Fixtures
Click Image to Enlarge
Click Image to Enlarge
Click Image to
Enlarge
This
portable communication tower assembly weighs approximately 1,200 lbs and can
easily support/lift 150 lbs fixtures and other types of equipment. The entire
tower assembly is shipped via common freight carrier or flatbed. Larson
Electronics can customize these units according to customer requirements with
longer sections and larger mounting plates. For example, the LM-40-4S is another
model that reaches to a length of 40', with base section 11.25' in length,
lower section 11.25' in length, an upper section 11.25' in length, and
a top section 11.75' in length. Larson Electronics can custom build these towers
to meet your overall and collapsed height requirements.
We
also offer a choice of either manual or electric winches, finishing, and
equipped light heads. Winch options include 1,000 lbs hand winches (included
standard) or optional electric winches for standard light towers, and heavy duty
winches and hoists for high payload units. Powder coating color can be
customized (the standard mast is gloss blue). Tower location on the trailer bed
can be tongue mounted, front of the trailer bed, or center of the trailer bed.
These towers can be fitted with Larson Electronics line of high output light
heads, or customize the mast head to meet the mounting requirements for your
equipment.
Diesel Generator: The LM-20-3S-ATM-TLR-DGP-3KW features a diesel generator on the trailer. This unit offers 3,000 watts of power (3,500 starting watts) and 120V output. Operators may access three receptacles and two USB ports on the generator for powering customer-provided equipment. An accessible dial enables selection of the following functions: Start, Run and Stop.
Suggested Applications: Mobile
communication services, extending site capacity, site repair, disaster recovery,
emergency communications, surveillance, military, outdoor operations, remote
deployment, temporary deployment, outdoor events, emergency camps, security
deployment and more.
At
Larson Electronics, we do more than meet your lighting needs. We also provide
replacement, retrofit, and upgrade parts as well as industrial grade power
accessories. Our craftsmen can custom build any lighting system and/or
accessories to fit the unique demands of your operation. A commitment to
honesty, quality, and dependability has made Larson Electronics a leader in the
lighting and electronics business since 1973. Contact us today at 800-369-6671
or message
for more information about our custom options tailored to meet your specific
industry needs.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
Payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
Return & Refund Policy
For All non-Larson Products If you are not satisfied with a product, contact us by emailing or call 1-844-787-LITE within 30 days of receipt. A refund may be arranged excluding freight charges upon inspection. Returned merchandise must be shipped in original packaging, freight prepaid, unused, and in resalable condition, and are subject to 25% restocking fee. PuriLite inspects all returns and reserves the right to refuse credits on damaged, used or non-resalable items. Your only obligation is the freight charge and restocking fee, provided your return is complete with original packaging, all documentation, warranty cards, cables etc. PuriLite reserves the right to authorize product returns after 30 days have passed from the order date. If the product is accepted after this period, it is subject to a 25% restocking fee and credit will be issued toward future purchases only.
Shipping and handling charges are non-refundable for all returns. The customer may also be responsible for return shipping charges, insurance and shipment tracking for returned merchandise.
Once you place an order, the following products are non-returnable: custom-cut, customer built or special order items (such as matting, slings, cranes, prefab offices, buildings, mezzanines, assembled lockers and regularly stocked items such as generators, pressure washers, water and trash pumps, snow throwers, radio headsets, striping paint, line stripers, floor care machines, vacuums, custom fabric chairs, forklifts) your order is considered non-cancellable and any custom-cut, customer built or special order items purchased by you are also non-returnable. Consumable style bulbs or lamps are not returnable. There are no returns on any medical and/or sanitizing products for obvious safety reasons. This includes PPE (including masks), tests, thermometers, sprayers and UVC lighting of any kind (portable and surface).
Leased and hazardous items are also non-returnable. Contact customer service for a complete list of applicable products.
Larson product return policy Every order is tested prior to shipping. The product is tested before it is put into the shipping box, crate, pallet, etc. Larson take pictures and videos of every product for every order being shipped, and store these pictures and videos with the order number in our system. Because of the complexity of some of our products, we have a very limited return policy.
For safety reasons, we do not accept returns on any hazardous location, explosion proof or intrinsically safe products. Once these products leave the factory, we cannot be sure what happens to them. We must re-build and re-certify the units to specification to ensure that the next customer receives an item that is safe to use. This is cost prohibitive. For that reason, we do not accept returns on classified products. We do not accept returns on transformers, phase converters, or frequency converters. In order to install one of the aforementioned products, typically customers will modify the product (i.e. penetrate the housing to make connections, punch out knockouts, remove or damage tinning on lead wires during installation). Because we video test every unit before it ships to ensure the unit operates as described, we know when they leave here the units are operationally functional and meet the output voltage when supplied with the input voltage per the product specification. To be clear, we do not accept returns on these items under any circumstances for these reasons.
Products that are not addressed in the above two conditions must be returned in new, unused condition.
Below are some additional considerations:
Electrical/electronic parts are easily damaged by improper installation or testing. Because electronics are very sensitive to voltage overloads, it does not take much of a voltage spike to ruin a component. Because of this risk, all electrical products returned will undergo electrical testing and assessed a testing fee. This fee will be subtracted from the final return value.
Consumable style bulbs or lamps are not returnable.
Products that contain emergency backup components are subject to very narrow warranty terms and do not qualify for return. For customer convenience, we engage the battery pack prior to shipping all emergency backup products. Many times, particularly with hazardous location rated products, the battery packs are difficult to access and the customer generally plans to install the units shortly after receipt of the shipment. Battery backup components using older technologies (Nicad, NIMH, SLA, etc) will fail quickly if they do not maintain valid grid tie support. In other words, the batteries must receive a consistent maintained charge to perpetuate long lifespans. Battery backup products that are shelved (not installed) for periods greater than 3 weeks will likely fail and need replacement sooner. This replacement will not be covered under warranty. This can also occur is the units are installed but the grid tie option is not connected correctly. Customers can specify that they do not want the battery pack to be engaged at the time of ordering if they plan to shelve the units for long periods of time prior to installation.
There are many products on the site and not all pictures depict the exact configuration of each product. Many products are custom built and/or built on demand. In some cases, products are designed and not sold immediately and rendering may be used. In all cases, the end product is built to the specification listed and the pictures shown may be close approximations. Pictures are more likely to be close approximations with more complex products, including transformers, power distribution systems, control systems, light tower systems and other highly customizable products. In no way does the approximation validate a potential return. We always build to the specification. If customers have questions, they should ask prior to purchase to clarify.
There are no returns on any medical and/or sanitizing products for obvious safety reasons. This includes PPE (including masks), tests, thermometers, sprayers and UVC lighting of any kind (portable and surface)
Many international orders, specialty orders and other complex build orders require prepayment in advance. This prepayment represents a commitment to the order. Cancelling the order will result in a deduction from the original amount paid if any refund is available, since an investment of time and money is typically required to acquire materials and prepare the order. While not all orders in this category require prepayment, cancellation fees may apply to other build orders as well. The percentage of the deduction is at Larson’s discretion but usually ranges from 30 to 50%.
How to Return For all returns, you can email us at sales@purilite.ca. You will need the invoice number in the subject line of the email. You can use one of your preferred carriers. Please note that for freight collect shipments, you are responsible for order tracking once the freight is loaded onto the truck. In addition, PuriLite Industrial cannot assist you with filing damage claims with your carrier.
All returns must be authorized by PuriLite. A Return Authorization Number must be obtained from PuriLite Customer Service Department, and the client must provide the Invoice number at the time of the request. The following conditions must be met. Failure to do so could result in refusal of a shipment by us.
At the time of the return, goods must be a stock item with PuriLite and the returned quantity must correspond to the quantity of the original packaging
Approval and shipping destination must be obtained from PuriLite before returning goods;
Goods must be returned to the appropriate location within 10 working days after receiving the return authorization number;
The return authorization number and invoice number must be identified on the return address label;
Goods must be in their original packaging, arrive undamaged and in resalable form
All returns are to be sent prepaid;
Specially ordered goods are non returnable – these products are identified with a part number beginning with a // on quotes and invoices.
Goods damaged in transit must be signed as damaged by the receiver and carrier at the time of receipt of goods in order to request credit from PuriLite.
PuriLite reserves the right to deny any Returns or Claims if the above conditions are not met.
Orders for products affected by x-factor events such as viral outbreaks and other extreme circumstances CANNOT be returned once shipped and billed.