|LM-20-3S-TLR10-JB-2X8D-24V-BCC.110V Trailer Mounted 3-Stage Light Tower||Quick Summary|
|Light Mast Specs||9` to 20` Light Mast|
|Tower Length: 9` to 20`||Steel Construction|
|Mast Head Length: 44"||Powder Coated or Galvanized Finish|
|Capacity: 150 lbs||Removable Mast Head|
|Materials: Steel||(4) 1,000lb Retractable Outriggers|
|Finish: Powder Coated - Gloss Blue (Galvanized Optional)||55 mph Wind Resistance|
|Operation: (2) 1,000lbs Hand Winches, Electric Optional||Manual or Optional Electric Operation|
|Batteries: (2) 12V 8D 250aH|
|Total Capacity: 500aH|
|Battery Charger: 30A 110V w/ 10' Input Line-in Cord|
|Runtime @ 24V DC: Up to 600W for 8 Hours to 50% SLA Safety Discharge Limit|
|Trailer Dimensions: 10-L` x 6`-W trailer bed|
|Hitch: 2" Ball Coupler|
|Wiring: 4-Pin Flat|
|Suspension: 5,400 Lb 4-Leaf Double Eye Springs|
|Outriggers: (4) 1,000 Manual Crack Leveling Jacks - Retractable|
|Wheels: (2) 15" 5x4.5 Steel Rims|
|Tires: ST205/75/D15 H188|
|Job Box External Dimensions: 48" x 24"|
|Job Box Storage Capacity: 16 cu. ft.|
|Weight: +-1200 lbs|
|Shipping: Common Freight||Toll Free: 1-800-369-6671|
|Shipping Dimensions: 16.5`-L x 4`-W x 5`-H||Intl: 1-214-616-6180|
|Shipping Weight: +-1700 lbs|
|Options: Length- Mounting-Fixtures/ Call Us for Special Requirements|
|Made in the USA The Larson Electronics LM-20-3S-TLR10-JB-2X8D-24V-BCC.110V trailer mounted fold over 3-stage light mast provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations up to twenty feet. This light tower folds over for easy transportation, as well as features a rotating boom that allows for 360° of rotation and a removable mast head for storing mounted equipment when not in use. Equipped with portable batteries, the entire assembly is mounted onto a 10` single axle trailer, allowing operators to transport this fold over boom from location to location. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* The LM-20-3S-TLR10-JB-2X8D-24V-BCC.110V is designed to allow operators to quickly and safely deploy equipment in temporary locations and remote sites. The tower can be extended to 20` above the trailer floor for maximum area coverage, and collapsed to 9` for applications where a smaller footprint is required. The tower is constructed of square steel tubing with a lower section 4" by 4" by 1/8" thick, middle section 3" by 3" by 1/8" thick, and an upper section 2" by 2" by 1/8" thick. Each section has 1` foot of overlap. The mast is elevated using an included 1,000lb rated hand winch with 3/16" galvanized steel cable and extended to its full height using a second 1,000 lbs winch. There are two, 12V 8D 250aH batteries (wired in 24V for 500aH total capacity) on the trailer. At full charge, the system can power up to 600 watts of equipment at 24V DC for 8 hours before reaching the 50% discharge limit of the SLA batteries. As a general safety practice, SLA batteries should not be discharged beyond 50%. Doing so may damage the battery and lower its overall capacity. Operators can access a 30-amp battery charger, which operates on 110V and comes with a 10' input line-in cord.|
A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for standard payloads up to 150 lbs. When elevated to its full upright position, the mast can be rotated a full 360°. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different positions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand.
The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. This light mast is mounted to a 10` by 6`, single axle trailer via six 1/2" anchor bolts. The two wheel trailer is equipped with 5,400 lbs axle and leaf springs with 15" trailer tires. The trailer can support and haul an additional 3,500 lbs of equipment. A standard 2" ball coupling, two standard safety chains, and 7-pin flat trailer plug allow for easy hookup and towing. A rugged and waterproof job box is included, safely secured to the trailer. A removable A-frame stand on the trailer allows operators to bolt up to two 300 watt user provided solar panels.
The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. Four 1,000 lbs hand crank leveling jacks are used for leveling. The jacks can be leveled by hand crank or attachment provided for power drills. These outriggers can be extended 2` out from the side of the trailer for added stability. When lowered to 9`, the mast can withstand winds up to 55 mph. Custom builds can be provided for higher wind speed resistance when fully raised.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.