|LM-30-3S-10TLR Trailer Mounted 3-Stage Light Tower||Quick Summary|
|Light Mast Specs||12` to 30` Light Mast|
|Tower Length: 12` to 30`||Steel Construction|
|Mast Head Length: 44"||Power Coated Finish|
|Capacity: 150 lbs||Removable Mast Head|
|Materials: Steel||(4) 1,000lb Retractable Outriggers|
|Finish: Powder Coated - Gloss Blue||125 mph Wind Resistance|
|Operation: (2) 1,000lbs Hand Winches, Electric Optional||Manual or Optional Electric Operation|
|Cable: 3/16" Galvanized Aircraft Cable||4-Corner Pickeyes for Air Transport|
|Trailer Dimensions: 10`-L x 6`-W trailer bed|
|Hitch: 2" Ball Coupler|
|Wiring: 4-Pin Flat|
|Suspension: 3,500 Lb 4-Leaf Double Eye Springs|
|Outriggers: (4) 1,000 Manual Crack Leveling Jacks - Retractable|
|Wheels: (2) 15" 5x4.5 Steel Rims|
|Tires: ST205/75/D15 H188|
|Weight: +-1200 lbs|
|Shipping: Common Freight||Toll Free: 1-800-369-6671|
|Shipping Dimensions: ~11`-L x 8`-W x 8`-H||Intl: 1-214-616-6180|
|Shipping Weight: +-1700 lbs|
|Options: Length- Mounting-Fixtures/ Call Us for Special Requirements|
|The customer ships the failed light mast to Larson Electronics at their expense. If the failure is a manufacturer defect, we will repair and/or replace the unit.|
|This unit is Made In USA - Manufactured in Texas The Larson Electronics LM-30-3S-10TLR trailer mounted fold over 3-stage light mast provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations up to thirty feet. This light tower folds over for easy transportation, features a rotating boom that allows for 360° of rotation, and a removable mast head for storing mounted equipment when not in use. The entire assembly is mounted onto a 10` single axle trailer, allowing operators to transport this fold over boom from location to location. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This telescoping three stage steel light mast from Larson Electronics’ is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 30` for effective coverage. This light boom can be extended to 30` above the trailer floor for maximum area coverage, and collapsed to 12` for applications where a footprint smaller is required. The tower is constructed of square steel tubing with a lower section 10.08` in length and 4" by 4" by 1/8" thick, middle section 12.23` in length and 3" by 3" by 1/8" thick, and an upper section 10.78` in length and 2" by 2" by 1/8" thick. Each section has 1` foot of overlap. The mast is elevated using an included 1,000lb rated hand winch with 3/16" galvanized steel cable and extended to its full height using a second 1,000 lbs winch. The mast is mounted at the back of a 10` trailer and the mast head hangs over the tongue of the trailer.|
A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for standard payloads up to 150 lbs. When elevated to its full upright position, the mast can be rotated a full 360°. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different positions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand.
The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. This light mast is mounted to a 14` by 6`, single axle trailer via six 1/2" anchor bolts. The two wheel trailer is equipped with 3,500 lbs leaf springs and 15" trailer tires. The trailer can support and haul an additional 2,000 lbs of equipment. A standard 2" ball coupling, two standard safety chains, and 4-pin flat trailer plug allow for easy hookup and towing.
The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. Four 1,000 lbs hand crank leveling jacks are used for leveling. The jacks can be leveled by hand crank or attachment provided for power drills. These outriggers can be extended 2` out from the side of the trailer for added stability. Four pickeyes, one per corner of the trailer, allow this unit to be moved via helicopter or transport. When lowered to 13.5`, the mast can withstand winds up to 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.