10 KVA Portable Power Distribution, 480V-230V Euro 1PH, (1) 16A Schuko Receptacle, 25' Line-In


Sale price$13,032.99


Specifications / Additional Information
MPD-CD1-BSB-SE10SR-ZZ-1.K01-M1 -Temporary Power Distribution System Ratings
Line-in Cord: 25' #10/3 AWG TYPE SOOW Cord Max Primary OCP: 25 A @ 480 V
Line-in Cord Cap: Not Included - Requires Minimum Use Device 30A @ [480V] (**Customer Provided**) Max Secondary Output: -
Primary Voltage (V): 480 V AC NEMA 3R Indoor or Outdoor Use
Primary Phase (PH): 1-Phase (1PH) NEMA 3R In-Use Weather Shield
Primary Frequency (HZ): 60 Hz (60-cycles) Made in the USA
Primary Breaker: (1) 25A 2P MCCB [480 V] NRTL Certified to UL 1640
Primary Protection: MCCB Circuit Breakers NRTL Certified to CSA C22.2 No. 14
Transformer (KVA): 10 kVA 480V to 230V Euro 1PH N3R  
Secondary Voltage (V): 230 V AC Euro Powder Coat Finish Standards:
Secondary Phase (PH): 1-Phase (1PH) Complies with ASTM D-523
Secondary Frequency (HZ): 60 Hz (60-cycles) Complies with ASTM D-3359
Secondary Panel: 230 V Euro 1PH 100A MLO Hinged N3R Complies with ASTM D-522
Secondary Breakers: (1) 16A Breakera Complies with ASTM D-3363
Secondary Outlet(s): (1) 16A Schuko Receptacle Complies with ASTM D-2794
Secondary Protection: MCB Circuit Breakers; Weatherproof Covers  
Form Factor: Blue Powder Coated MGL w/ No Flat Tires  
Front Cover: Weatherproof Lid w/ Front-located Handle and Lock  
Cover Locking Position: Upward w/ Internal Locks on Both Sides of the Lid  
Vibration Isolators: Transformer and Breakers  
Drain Plug: Panel  
Cart Material: Steel  
Cart Finish: High-strength TGIC Polyester Powder Coated Blue Special Orders - Requirements
Cart Handle Orientation: Horizontal
Lifting Eyelet: (1) Center Point Toll Free: 1-800-369-6671
No-flat Tires: (2) Black
Dimensions: 41"-W x 30"-D x 66.5"-H
Weight: 350 lb
Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*  
' Product Overview '
function MM_openBrWindow(theURL,winName,features) { //v2.0 window.open(theURL,winName,features); }
Made in Texas The Larson Electronics MPD-CD1-BSB-SE10SR-ZZ-1.K01-M1 temporary power distribution system converts single-phase 480 V AC electrical current into single-phase 230 V AC Euro. This unit provides operators the ability to safely tap into and distribute 480 V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MPD-CD1-BSB-SE10SR-ZZ-1.K01-M1 temporary power distribution system gives operators the ability to power their 120 volt equipment from a single system. Operation:
  • Primary Voltage: 1-phase 480 V AC
  • Primary Receptacles: N/A
  • Transformer: 10KVA 480V to 230V 1PH N3R
  • Secondary Voltage: 1-phase 120V AC
  • Secondary Breaker: 16-amp
  • Secondary Receptacle: 16A Schuko
*See specification table at the top of the page for more information about the power distribution system. Protective Construction: A weatherproof flip cover at the front of the unit can be lifted upwards via an accessible handle, which serves as protection for (primary and secondary) breakers and receptacles in rugged environments when deployed at the site. Operators may access locks on the door and on the ears (accessible from the inside of the lid) of the panel. The panel can be positioned upwards and locked in place for easy access to receptacles and breakers. A drain plug on the panel helps the power distribution system achieve a NEMA 3R rating, allowing the unit to be used in both indoor and outdoor locations. The transformer is protected by vibration isolators that reduce damage to exterior jacket of wiring components and decrease noise during operation. In MGL-style power distribution systems, the presence of vibration isolators ensures wiring between the transformer and panel is well protected and does not have to be frequently replaced. Vibration isolators can also be found on the breakers, which protect the breakers from damage, prevent loose bolts/nuts and reduce overall noise during use in the field. The power distribution system is constructed of steel with a polyester powder coated blue finish for durability against dirt, moisture and mild corrosion. This special coating creates a high-strength barrier for protection from accidental bumps and scratches. The TGIC polyester powder coat finish offers reliable resistance against chemicals, UV light (sun light) and degrading elements in outdoor locations. Our powder coating solution ensures robust color retention for many years without fading. Custom colors, such as black, grey, desert tan or forest green, and galvanized finishes are available upon request. Non-standard powder coat colors or galvanized finishes may increase price and lead times. The transformer and load center/distribution assembly is mounted to a standard steel cart style frame resulting in an extremely stable, durable, and mobile power distribution platform. Two rubber tires and a cart style mounting platform provides easier substation mobility, and a center point lift eye allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or to discuss your specific requirements.

Shipping and delivery Information


American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed