100A Portable Distribution Panel - 480V-208Y/120 3PH - (2) DR100 & (12) 5-20R GFCI - DR100 Inlet
100A Portable Distribution Panel - 480V-208Y/120 3PH - (2) DR100 & (12) 5-20R GFCI - DR100 Inlet
| MPD-CW51-82.100AB-YT0YT-LZ-2.D03-12.N10-M1 -Temporary Power Distribution System | Ratings |
| Line-in Cord: N/A | Max Primary OCP: 100A @ 208V | |
| Line-in Cord Cap: DR100 UL1682 100A Male Pin & Sleeve Inlet [208/125V] | Max Secondary Output: - | |
| Primary Voltage (V): 208/120V AC Wye | NEMA 3R Indoor or Outdoor Use | |
| Primary Phase (PH): 3-Phase (3PH) | Made in the USA | |
| Primary Frequency (HZ): 60 Hz (60-cycles) | NRTL Certified to UL 1640 | |
| Primary Panel: 208Y/120V 3PH 100A MCB N3R | NRTL Certified to CSA C22.2 No. 14 | |
| Primary Breaker: (2) 50A 3P MCB [250V]; (12) 20A 1P MCB [125V] |  | |
| Primary Outlets: (2) DR100 UL1682 100A 3P+N+G Pin & Sleeve Receptacle [208/125V]; (12) 5-20R NEMA GFCI DPLX [125V] |  | |
| Primary Protection: MCCB Circuit Breakers; MCB Circuit Breakers; GFCI's | Powder Coat Finish Standards: | |
| Transformer (KVA): - | Complies with ASTM D-523 | |
| Secondary Voltage (V): - | Complies with ASTM D-3359 | |
| Secondary Phase (PH): - | Complies with ASTM D-522 | |
| Secondary Frequency (HZ): - | Complies with ASTM D-3363 | |
| Secondary Panel: - | Complies with ASTM D-2794 | |
| Secondary Breakers: - |  | |
| Secondary Outlets: - |  | |
| Secondary Protection: - |  | |
| Form Factor: Blue Powder Coated Steel Skid Mounting Plate |  | |
| Doors: (2) |  | |
| Frame Material: Steel |  | |
| Frame Finish: High-strength TGIC Polyester Powder Coated Blue |  | |
| Cart Handle Orientation: Horizontal | ||
| Lifting Eyelet: (4) Top Located | ||
| Skid Pockets: (2) Bottom Located | ||
| Casters: - | ||
| Dimensions: 55.5"-L x 33.5"-W x 70"-H | ||
| Weight: 1650 lbs | ||
| Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. | *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* |  |
| Made in Texas The Larson Electronics MPD-CW51-82.100AB-YT0YT-LZ-2.D03-12.N10-M1 Power Distribution Substation provides operators the ability to safely tap into and distribute 208/120V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MPD-CW51-82.100AB-YT0YT-LZ-2.D03-12.N10-M1 temporary power distribution system gives operators the ability to power their 120 volt equipment from a single system. Operation: • Primary Voltage: 3-phase 208/120V AC Wye • Primary Receptacles: (2) DR100 UL1682 100A 3P+N+G Pin & Sleeve Receptacle [208/125V]; (12) 5-20R NEMA GFCI DPLX [125V] • Transformer: N/A • Secondary Voltage: N/A • Secondary Receptacles: N/A *See specification table at the top of the page for more information about the power distribution system. Protective Construction: This temporary power distribution unit is fully enclosed and is ruggedly constructed to withstand demanding conditions and industrial applications. The system is accessible via two doors at each end for access to breakers on the panels and a center-located door for access to receptacles. The model is equipped with bottom-located forklift skid pockets and four top-located lifting eyelets, which allows easy lifting with cable or chain hooks. The power distribution system is constructed of steel with a polyester powder coated blue finish for durability against dirt, moisture and mild corrosion. This special coating creates a high-strength barrier for protection from accidental bumps and scratches. The TGIC polyester powder coat finish offers reliable resistance against chemicals, UV light (sun light) and degrading elements in outdoor locations. Our powder coating solution ensures robust color retention for many years without fading. Custom colors, such as black, grey, desert tan or forest green, and galvanized finishes are available upon request. Non-standard powder coat colors or galvanized finishes may increase price and lead times. The transformer and load center/distribution assembly is mounted to a standard steel cube style frame resulting in an extremely stable, durable and mobile power distribution platform. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or to discuss your specific requirements. |
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
