Larson 25 Watt LED Retrofit from 70 Watt Metal Halide or 150 Watt High Pressure Sodium Base Stand Light

Larson ElectronicsSKU: PL3-RETRO-EPL-BS-25WRE

Sale price$905.99


PuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1-844-787-5483 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.
25 Watt LED Retrofit from 70 Watt Metal Halide or 150 Watt High Pressure Sodium Base Stand Light. This portable LED light offers operators with 2,750 lumens while drawing only 25 watts.
As well as unparalleled heat control, the RETRO-EPL-BS-25WRE conversion kit from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsiusresist of dust, dirt and humidity. The housing is powder coated for added durability and resistance to corrosion and features integral cooling fins for efficient heat dissipation to increase LED lifespan. The CREE LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use.
A single CREE 25 watt LED producing 2,750 lumens is combined with high output reflector to produce a narrow 10 degree spread spot beam approximately 1000` long combined with a 60° flood beam. This combination spot and flood beam provides both distance and width from a single light source. Objects are clearly and sharply illuminated all the way to the end of the beam reach. This unit is universial voltate and can be configured to operate on 120-277V AC at 50/60 Hz.
Spot Beam- Shallow/Special Contour
The unique shape and shallow contour of this portable explosion proof LED light`s reflector is paired with a convex lens and inset lens position to efficiently capture and project a focused beam of light while reducing the light spillage and waste that is common with many spotlights. This efficient design also reduces casting, a phenomenon that occurs when wasted light "spills" around the light source. Often times, when surrounded by water, snow or other reflective surfaces, this light spillage prevents the human eye from adjusting properly and seeing objects at distance. With the RETRO-EPL-BS-25WRE spotlight configuration, 90% of the emitted light is captured and focused, clearly and sharply illuminating objects all the way to the end of the beam reach.
LED Benefits:
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
LED Drivers:
Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the EPL-BS-25WRE-100 to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.
Cree Specific:
This lamp uses Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 110 lumens per watt effective lumen output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than traditional light sources.
Contact for more information about our custom options tailored to meet your specific industry needs.

Lamp Type:
Dimensions: -
Weight: 7 Lbs
Voltage: 120-277V AC, 50/60Hz
Total Watts: 25W
Total Lumens: 2,750
LED Lamp Life Expectancy: 50,000+ Hours
Color Temp: 6000K
Beam Angle: 60°
Lighting Configuration: Combination 10° Spot & 60° Flood
Power Efficiency: >84%
Power Factor: 0.96
Amperage: 0.208A @ 120V, 0.104 @ 240V
Ambient Operating Temp Range: -40° C to +85°C
Operating Temp Rating: T5
Lamp Housing Material: Copper Free Cast Aluminum

Shipping and delivery Information


American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed