Solar Powered Dual LED Light - (2) 10W Lamps - 12 Hr Run Time - Automatic Timer

LARSON ELECTRONICSSKU: PL3-SPLED-2X-1X10WRE-AT-20C
filler

Price:
Sale price$3,035.99

Description

Specifications / Additional Information
SPLED-2X-1X10WRE-AT-20C Solar Powered Dual LED Light Features/Quick Summary
Operation: Automatic Timer High Output LED Light Source
Panel Dimensions: 28"W x 24.732"D x 28.459"H 100% Solar - Requires No External Power
Lamp Dimensions: 3"W x 4.5"D x 3.8"H IP68 Waterproof LED Light Assembly
Panel Wattage: 30W 50,000+ Hour LED Lamp Life
Light Wattage: 20W Total (10W Per Lamp) Panel Mount or External Mount Light
Panel Mounting: Surface or Post Surface or Post Mount Panel
Lamp Mounting: Trunnion / U-Bracket - Mounted to Panel or External Mount Off/On/Automatic Sprinkler Timer
Lamp Configuration: 10° Spot, 20° Wide Spot, or 60° Flood
Lumens: 1,720 Total (860 Per Lamp)
LED Color Temperature: 6000K Special Orders - Requirements
LED Lamp Life: 50,000+ Hours
Battery: (2) 8aH Sealed Lead Acid Batteries
Charging Time: 5 Hours
Runtime: 12 Hours
Wiring: 20` SOOW Cable w/ Deutsch 2-Pin Disconnect (6" Y Cable b/t Lamps)
' Product Overview '
function MM_openBrWindow(theURL,winName,features) { //v2.0 window.open(theURL,winName,features); }
Made in the USA The SPLED-2X-1X10WRE-AT-20C from Larson Electronics is a Solar Powered Dual LED Light that is an ideal lighting solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This rechargeable solar powered dual LED light fixture is offered in a spotlight or floodlight beam pattern making it ideal for remote applications. The pair of LED light heads equipped with this unit are connected together via a 6" Y cable which allows them to be pointed in different directions from each other. The SPLED-2X-1X10WRE-AT-20C is equipped with an automatic sprinkler timer. This solar powered LED light is powered by two 8aH sealed lead acid batteries that are recharged by a 30 watt solar panel. Light output comes from a pair of 10 watt LED lamps that each produce 860 lumens. The lamps are connected via a 6" Y cable. This allows operators to mount the lights with them pointing in different directions which increases the area coverage of this unit. The solar panel is configured to operate on an automatic timer. The lights run for 12 hours when the batteries are fully charged. The sealed lead acid battery pack is contained within the solar panel, not the light. Charging time for the batteries is 5 hours when exposed to direct sunlight. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge. Mounting options include the ability to attach the fixture to flat surfaces such as walls or round/square pole mounting such as on flagpoles or structure supports. The included 20` SOOW cord with Deutsch 2-pin disconnect that runs between the solar panel and the light offers operators convenience and flexibility during the mounting process. The LEDP WRE series LED lights are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. An integral Pulse Width Modulation controller, small profile, low power requirements, high durability and versatile mounting makes these LED lights ideal for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, off-roading, and commercial structure illumination. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED's core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Durability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +85° Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The Cree XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. Automatic Timer: This solar-powered lighting system features an intermatic sprinkler timer that permits 1 to 60 'ON' operations every 24 hours. The timer is designed for water metering in increments of 12 minutes to 20 hours, and 45 minutes to help conserve and mazimize water sources. The 14-day skipper feature allows irrigation to be stopped on operator selected days and also allows 'every other' day operation. Additionally, an 'ON/OFF/AUTOMATIC' switch allows shutdown during rain, or extended watering during dry days, without disturbing the automatic cycle. Larson Electronics has further upgraded the options available with this light. A twenty-foot extension cord connects the solar panel to the LED lights, allowing the lights to be mounted separately from the panel. This means the solar panel can be mounted in direct sunlight while the light is mounted in a workspace. The cord between the light and panel ends in Deutsch connectors, allowing an optional longer extension cord to be attached, increasing the distance the light can be installed from the panel. Additionally, the two LED lights are connected together via a 6" Y cable which allows them to be pointed in different directions from each other. Optional longer extension cords are available at additional cost. Alternatively, the light can be mounted directly to the panel. Larson Electronics can also configure this light for special requirements including different lights and larger batteries. Suggested uses for this light include both commercial and industrial applications as well as consumer based installations. This light is ideal for boat docks, remote locations that rely on batteries for power, exterior outbuilding lighting, hunting cabins, parking areas, sign or entryway illumination, driveway lighting and anywhere a standalone lighting solution is needed.

Shipping and delivery Information

Payment

American Express Apple Pay Bitcoin Bitcoin Cash DAI Diners Club Discover Dogecoin Ethereum Google Pay Litecoin Mastercard PayPal Shop Pay USDC Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed