Solar Powered 5W LED Light - 16 Hour Run Time - 35' X 35' Illuminated Area

LARSON ELECTRONICSSKU: PL3-SPLED-5E
filler

Price:
Sale price$2,201.99

Description

Specifications / Additional Information
SPLED-5E Solar Panel LED Light
Lamp Type: LED  
Panel Dimensions: 14.3"-W x 27.89"-L x 3.19"-D  
Weight: N/A  
Operation: On/Off, Motion, Day/Night, Day/Night/Motion  
Light Configuration: 120° Flood  
Solar Panel Watts: 30  
Lamp Watts: 5  
Lamp Lumens: 500  
Luminous Efficacy: 83.34 Lumens per Watt
Ambient Operating Temp: -10°C to +50°C
Battery: (2) 8aH sealed lead acid batteries
Charging Time: 5 Hours
Runtime: 16 hrs  E-mail:
Panel Mounting: Surface or Post Fax:  1-903-498-3364
' Product Overview '
Made in the USA The Larson Electronics SPLED-5E Solar Powered LED Light is an ideal lighting solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This solar powered LED light is fully automatic and powered by two 8aH sealed lead acid battery that is recharged by a 30 watt solar panel. Light output comes from a 5 watt LED lamp that produces 500 lumens. This solar panel comes equipped with manual on/off toggle switch, a motion detector, a day/night sensor, or a day/night sensor with motion detector. The on/off switch will activate and shut off the light fixture according to the operator`s preference. The motion detector will only activate the light when motion is detected. The day/night sensor will only operate the light when daytime illumination falls below a specific lux level, which is adjustable on the photocell. The day/night and motion sensor is programmed to active the solar panel in the evening and to shut it off during the day while the motion sensor will activate the panel upon detecting motion. This unit is for night time operation, and will not be visible during the day. For a day time visible solar powered lamp, please check out the . The light runs for 16 hours when the battery is fully charged. The sealed lead acid battery pack is contained within the solar panel, not the light. Charging time for the batteries is 5 hours when exposed to direct sunlight. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge. The light produced by the SPLED-5E will cover an area 35’L x 35’W when mounted 12 feet from the ground. Mounting options include the ability to attach the fixture to flat surfaces such as walls or round/square pole mounting such as on flagpoles or structure supports.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied and emit light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Larson Electronics has further upgraded the options available with this light. A two foot extension cord connects the solar panel to the LED light, allowing the light to be mounted separately from the panel. This means the solar panel can be mounted in direct sunlight while the light is mounted in a workspace. The cord between the light and panel ends in Deutsch connectors, allowing an optional longer extension cord to be attached, increasing the distance the light can be installed from the panel. Optional longer extension cords are available at additional cost. Larson Electronics can also configure this light for special requirements including different lights and larger batteries. Suggested uses for this light include both commercial and industrial applications as well as consumer based installations. This light is ideal for boat docks, remote locations that rely on batteries for power, exterior outbuilding lighting, hunting cabins, parking areas, sign or entryway illumination, driveway lighting and anywhere a standalone lighting solution is needed.

Shipping and delivery Information

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed