10W Portable Solar Powered Quadpod LED Light - 12 Hr Run Time - Day/Night Photocell or Motion Sensor


Sale price$6,591.99


Specifications / Additional Information
SPLED-QP-1X10WRE Solar Powered Portable LED Light Features/Quick Summary
Operation: 24/7, On/Off, Day/Night, Motion, or Flying Leads High Output Portable LED Light Source
Panel Dimensions: 28"W x 24.732"D x 28.459"H 100% Solar - Requires no External Power
Lamp Dimensions: 3"W x 4.5"D x 3.8"H IP68 Waterproof LED Light Assembly
Panel Wattage: 30 50,000+ Hour LED Lamp Life
Light Wattage: 10 Wheeled Quadpod for Convenient Portability
Panel Mounting: Portable Quadpod
Lamp Mounting: Portable Quadpod
Quapod Material: Aluminum
Quapod Finish: Powder Coated - Glossy Blue
Lamp Configuration: 10° Spot, 20° Wide Spot or 60° Flood
Lumens: 860
LED Color Temperature: 6000K Special Orders-Special Requirements
LED Lamp Life: 50,000+ Hours
Battery: (1) 8aH sealed lead acid batteries Phone: 1-214-616-6180
Charging Time: 5 Hours Toll Free: 1-800-369-6671
Runtime: 12 Hours Fax: 1-903-498-3364
Wiring: 6` SOOW cable w/ Deutsch 2-pin disconnect E-mail: 
' Product Overview '
Made in the USA The Larson Electronics SPLED-QP-1X10WRE Quadpod Mounted Solar Powered LED Light is an ideal portable lighting solution for remote areas and temporary standalone applications where connection to external power is either impractical or unavailable. This rechargeable solar powered LED light is offered in a spotlight or floodlight beam pattern and several different operating configurations, making it ideal for remote applications. The portable quadpod mount makes the SPLED-QP-1X10WRE simply to move around work areas and folds up for even more portability and for storage options. This solar powered LED quadpod light is offered in several different configurations and powered by one 8aH sealed lead acid battery that is recharged by a 30 watt solar panel. Light output comes from a 10 watt LED lamp that produces 860 lumens. This solar panel is configured to operate non-stop 24/7, day/night with photocell, motion sensor for security purposes, on/off switch for manual operation, or flying leads for operators to connect to user provided external switches. The day/night and motion sensor is programmed to active the solar panel in the evening and to shut it off during the day, activating the LED light when ambient lighting falls below 1 lux. The motion sensor will activate the panel upon detecting movement within range of the panel. The light runs for 12 hours when the battery is fully charged. The sealed lead acid battery pack is contained within the solar panel, not the light. Charging time for the battery is 5 hours when exposed to direct sunlight. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge. Mounting options include the ability to attach the fixture to flat surfaces such as walls or round/square pole mounting such as on flagpoles or structure supports. The included 3` SOOW cord with Deutsch 2-pin disconnect that runs between the solar panel and the light offers operators convenience and flexibility during the deployment process. The LEDP WRE series LED lights are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. An integral Pulse Width Modulation controller, small profile, low power requirements, high durability and versatile mounting makes these LED lights ideal for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, off-roading and commercial structure illumination. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Durability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +85° Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. The quadpod mount is powder coated for corrosion resistance and durability. Mounting: The SPLED-QP-1X10WRE is mounted on an aluminum quadpod mount that allows for simple and easy movement around temporary work areas and easy deployment, transportation and storage. The quadpod mount on this solar powered LED light is powder coated which allows it to resist corrosion and increases the durability of the mount. A glossy blue powder coat color lends to the aesthetics of the unit. Suggested uses for this light include temporary commercial and industrial applications as well as consumer based remote use and temporary deployment. This light is ideal for boat docks, remote locations that rely on batteries for power, outdoor project lighting, hunting cabins, parking areas, sign or entryway illumination, driveway lighting and anywhere a standalone lighting solution is needed.
Made in USA Quality Superior LED Benefits
1. 100% solar - No external power required. 2. 30 watt solar panel charges one 8aH sealed lead acid battery. 3. Fixture housing constructed of extruded corrosion resistant copper free aluminum. 4. Polycarbonate lens provides high durability. 5. Battery can be fully charged in 5 hours in direct sunlight. 6. Fully charged battery provides 12 hours of runtime. 7. Produces 860 lumens while drawing only 10 watts. 8. 70% lumen retention at 50,000 hours. 9. Portable quadpod mount for easy movement and deployment. 1. 50,000 hour lifespan. 2. Can SAVE 50% or more on energy. 3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs. 4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration) 5. 100% recyclable. 6. No toxins-lead, mercury. 7. No UV light, infrared radiation or CO2 emissions. 8. Qualifies buildings for LEED and other sustainable business certifications. 9. Bright, even light maintains consistent color over time. 10. Instant on/off - No flickering, delays or buzzing. 11. Very good color rendering. 12. Vibration/impact resistant. 13. Significantly cooler operation. 14. Less frequent outages, higher output improves workplace safety. 15. California Title 24 Compliant

Shipping and delivery Information


American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed