Made in Texas
The WCDE-6-NL mobile light tower from Larson Electronics is a towable lighting package powered by a liquid-cooled diesel engine turning a 6,000-watt generator. With a 30-foot rotating mast, this unit is ready for operators to install their own LED or metal halide lamps. This tower can run without refueling for up to 60 hours. The light tower is suitable for construction sites, outdoor events, farming operations, emergency camps, perimeter lighting, and remote locations without access to grid power.
*Please note that NO lamps are included with this package.*
The WCDE-6-NL is a towable light tower and genset package that contains a liquid-cooled diesel engine powering a 6,000 watt generator, which supplies the current to the lamps installed by the operator. This unit can run uninterrupted for 60 hours straight without refueling and includes a telescoping light mast which can elevate to a height of 30 feet. This mobile floodlight package is ideal for emergency services, large scale event illumination, construction, mining, industrial operations, and anywhere an extended operation capable mobile lighting solution is needed.
The WCDE-6-NL mobile light tower incorporates a long list of impressive features. The diesel engine is a Kubota unit that operates at 1800 rpm. This engine features a four-position keyed switch and glow plugs (preheat, off, run and start). A 30 gallon fuel tank allows the engine to operate for 60 hours continuously without refueling. The 6,000 watt generator is capable of producing 120/240 volt current at 60 Hz. The following receptacles can be found on this unit: (1) 120 VAC 20 Amp GFCI duplex outlets (NEMA 5-20R type) and (1) 240 V AC 30 Amp twistlock outlets (NEMA L6-30R type).
The operation system for this unit is a 15A control panel within the light tower enclosure. A 30A start limit breaker is available, which assures no load condition exists before starting. The enclosure is constructed of steel and is UV/fade resistant, as well as high temperature cured.
This tower is equipped with a T-head mounting platform at the top of the mast. Operators can use it to install their own existing LED or metal halide lights for portable and convenient illumination in hard to reach areas.
The telescoping boom consists of three sections extending up to 30 feet through the use of a self-braking winch and allows for rotating the lights 359 degrees. The telescoping boom is constructed of tubular steel to resist rusting and corrosion. This unit is equipped with single lifting eye and fork pockets. An automatic locking system may be used to secure the system during transportation. The cord on this mast is coiled and retractable.
All of the operating components are housed within a protective compartment constructed of 14 gauge steel and designed to provide airflow for cooling. The design and construction of this enclosure helps this unit operate at a low 71 Db noise level @ 23 ft. The entire unit can be loaded and unloaded onto trucks via forklift sleeves. The entire unit is mounted onto a two wheel trailer with a 3000-lb leaf spring axle. A standard two inch ball coupling and standard safety chains with S-hooks allow for easy hookup and towing.
Construction sites, outdoor events, farming operations, emergency camps, perimeter lighting, and remote locations without access to grid power
Contact firstname.lastname@example.org for more information about our custom options tailored to meet your specific industry needs.
Engine: Kubota D1105
Engine Type: Liquid Cooled, Diesel Engine
Engine Speed: 1800 RPM
No. of Cylinders: 3
Generator: Marathon Electric 60 Hz, 6 kW
Voltage: 120V/240V - 20/30A
Battery 500 CCA Wet Cell
Fuel Cell Capacity: 30 Gallons
Fuel Delivery: Electric
Noise Level: Db level 71 @ 23 ft
Mast Type: 3-Section
Boom Height: Up to 30'
Materials: Tubular Steel Tubular Steel Chassis
Operation: Single Winch System
Winch: 1500 lb, Self-Braking
Materials: Tubular Steel Tubular Steel Chassis
Hitch: 2" Ball Hitch
Finish: Industrial Grade Paint
Axle: 3500 lb Leaf Spring Axle
Outriggers: Side Outriggers - 8'-3.4" Span
Lighting: DOT Approved Tail, Side, Brake, and Directional Lights
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at email@example.com or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.