10W Solar LED Strobe Light - 30Hz Strobing Rate, Red - 40aH Battery Pack - FAA Compliant
10W Solar LED Strobe Light - 30Hz Strobing Rate, Red - 40aH Battery Pack - FAA Compliant
| AVL-HAL-SOL-L810-LED-V1-30C FAA Compliant Solar-powered LED Strobe Light | Ratings/Approvals |
| Solar Panel Specs | FAA AC 150/5345-43 |
| Operation: Day/Night | FAA Compliant |
| Panel Dimensions: 14.3"-W x 27.89"-L x 3.19"-D | Listed for United States and Canada |
| Weight: 15 lbs | Class I, Division 2 Groups A,B,C,D |
| Ambient Temp: -45°C to +55°C | Class I, Zone 2 Groups IIC,IIB,IIA |
| Runtime: 36 Hours (w/o Sunlight); 3 Full Evenings (w/o Light) | Class II, Division 2 Groups F,G |
| Charging Time: 5 Hours | IP66 |
| Battery: (1) 40aH Lithium-ion Battery Pack | NEMA 3, 4, 4X |
| Mounting: Surface or Pole | UL 844 Hazardous Locations |
| Wiring: 10` 16/2 SOOW | UL 1598 Luminaries |
|  | UL1598A Marine Luminaries |
| LED Strobe Light Specs | CSA C22.2 No. 137 Hazardous Locations |
| Lamp Type: A19 LED | UL 94-V-0 Flame Retardant |
| Lamp Dimensions: 5.94"-Diameter, 9.6" Height | USCG Accepted |
| Weight: 3 lbs | ABS Type Approved |
| Voltage: 12VDC or 24VDC | 150 MPH Wind Tolerance (Light) |
| Total Watts: 10W | Exposure to 130°F (4+ Hours) |
| Lumens: 1,050 | UV Radiation Resistant |
| Lamp Life: 50,000+ Hours | Salt Fog Environment (Mil-spec Salt Fog Test) |
| Luminous Efficacy: 105 Lm/W |  |
| Lamp Color: Red (Lens/Globe) |  |
| Color Rendering Index: >80 CRI |  |
| Beam Spread: 20° Vertical; 360° Horizontal |  |
| Lighting Configuration: Strobe |  |
| Strobe Rate: 30 Hz |  |
| Power Efficiency: >95% |  |
| Power Factor: 0.992 | |
| Amp Draw: 0.84A @ 12V, 0.42A @ 24V | |
| Ambient Operating Temp Range: -50° C to +85°C | |
| Operating Temp Rating: T2D | |
| Relative Humidity: 95% | |
| Housing Material: Polycarbonate |  |
| Lens Material: Hardened Borosilicate Glass |  |
| Mounting: Surface/Ceiling/Wall |  |
| Mounting Hub: (1) 3/4" NPT Hub |  |
|  |  |
| System Specs |  |
| Master/Slave Configuration: Up to 100 Slave Fixtures per Master | |
| Sync Controls: Master; to 1/60 Second | |
| Master/Slave Selection: Dip Switch | |
| Sensor Type: Day/Night | |
| Sensor Activation: 35fc (Minimum) | |
| Sensor Deactivation: 60fc (Maximum) | |
| Sensor Configuration: Remote Installation | |
| Sensor Wiring: 30` Between Sensor and Panel |
| The Larson Electronics AVL-HAL-SOL-L810-LED-V1-30C Solar LED Strobe Light is an FAA AC 150/5345-43 Compliant unit with applications in aviation and hazardous locations. This lighting system contains a red LED strobe light, powered by a 30-watt solar panel with a 40aH lithium-ion battery pack. A remote-mounted day/night sensor automates activation and deactivation during use. The AVL-HAL-SOL-L810-LED-V1-30C is an FAA Compliant solar-powered LED strobe light for signaling and notifications during aviation-related operations. This hazardous location lighting system consists of a 30-watt weatherproof solar panel, hazardous location LED strobe lamp (red), day/night sensor and 40aH lithium-ion battery pack. LED Strobe Light: The hazardous location LED strobe lamp offers 1,050 lumens of red light, with a strobing rate of 30 Hz. Equipped with a 20° vertical and 360° horizontal beam spread, the unit provides syncing capabilities with multiple strobe lamps to 1/60 second. Syncing features are controlled by a master unit, catering up to 100 slave LED fixtures per master. Operators are provided access to a dip switch inside the LED lamp for selection between master and slave. The lamp housing is waterproof, constructed of corrosion and chemical resistant polycarbonate with a red Pyrex globe, USCG accepted, ABS Type approved, and NEMA 4X compliant and suitable for hose-down areas. This hazardous location LED unit can survive heavy rains from all angles/directions, wind speeds up of 150 mph and 95% relative humidity. During use, the LED strobe light can also tolerate 130°F temperatures for 4+ hours and survive in salt-fog environments (Mil-spec salt fog test). For increased reliability in outdoor locations, this unit is resistant to UV radiation, which ensures no discoloration or cracking for 1 year. | |||||
|
|||||
| LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Solar Panel/Sensor: The 30-watt solar panel is equipped with a 40aH lithium-ion battery pack. At full charge, the system is capable of operating for 36 hours without sunlight or 3 full evenings without light. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on very cloudy days, the unit will not recharge. The solar panel is weatherproof and designed to catch the maximum amount of sunlight possible when properly mounted. The day/night sensor is programmed to activate the LED light when ambient lighting reaches 35fc (minimum); and deactivate the strobe lamp when ambient lighting reaches 60fc (maximum). Wiring: The LED strobe light is connected to the panel by 10` of 16/2 SOOW cord that provides flexibility for positioning of the solar panel and equipment into their respective optimum locations independently of each other. A 30` cable connects the day/night sensor to the solar panel. Mounting: The AVL-HAL-SOL-L810-LED-V1-30C is compatible with inverted ceiling, wall or surface mounting requirements. Operators may access one, 3/4" NPT hub on the unit for mounting the LED strobe light during installation. The mounting apparatus for the solar panel is designed to allow a variety of options, including flat surfaces, such as a wall and square or round pole mounting. The sensor is remote-mount compatible. Applications: Aviation, airspaces, helipads, signaling, military, aircraft hangars, FAA compliance, hazardous locations, marine locations, outdoor sites, remote notifications, industrial sites and more. |
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
