Larson Explosion Proof 3 Outlet Extension Cord - 3 Outlets w/ GFCI & 50' Cord - 3P2W EXP Plug - 20 Amp Ser
Larson Explosion Proof 3 Outlet Extension Cord - 3 Outlets w/ GFCI & 50' Cord - 3P2W EXP Plug - 20 Amp Ser
Sold by: Larson Electronics
Made in the USA
The Larson Electronics EPEXC-3X-GFCI-12.3-50-3P2W Explosion Proof GFCI cord whip is Class 1 Division 1 and Class 2 Division 1 approved and allows operators to connect lights and equipment into a GFCI protected outlet. This unit comes equipped with 50` of 12/3 SOOW cord terminated in a 20 amp rated explosion proof plug. This cord whip is ideal for operators looking to extend electrical power within hazardous work environments when hard piped outlets are not readily available.
The EPEXC-3X-GFCI-12.3-50-3P2W Explosion Proof GFCI protected cord whip allows operators to safely operate their explosion proof lights or equipment cords within the boundaries of the hazardous work area from explosion proof outlets. These units are constructed of 50 feet of 12/3 SOOW cable and are rated at 20 amps of continuous service. The cord is chemical and abrasion resistant and comes with three in-line, 20 amp, GFCI protected, explosion proof receptacle installed on one end and a 125/250V 3-pole, 2 wire pin and sleeve explosion proof plug installed on the other end.
The plug on this unit is an explosion proof pin and sleeve design. To ensure the highest safety, operators should make connections outside of the hazardous area. Each receptacle`s contacts are deep recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-20R, or 6-20R compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this cord`s explosion proof receptacles.
The ground fault circuit interrupter (GFCI) protects against possible injury from unwanted ground faults. This GFCI monitors the amount of current flowing through the unit, and provides immediate identification of faults by tripping the circuit when an imbalance is detected. Both the GFCI and outlet are factory sealed, enclosing any potentially arcing components within the copper free aluminum bodies.
The GFCI protected outlet is mounted to a non-sparking aluminum back brace to provide additional support to the unit. The back brace features a cutout carrying handle to aid in transport and storage, allowing operators to pick up and carry the unit with one hand or for mounting with wall hooks. The EPEXC-3X-GFCI-12.3-50-3P2W is ideal for extending the range of potable equipment within such as lighting systems, power tools, and other electrical equipment within environments where explosive vapors or flammable dusts exist or may exist.
Inter-Compatibility:
These cords use T style plugs and will work with non-explosion proof standard receptacles and plugs (NEMA 5-15R, 5-20R, or 6-20R) but will not work with standard 120V wall outlets. The included plugs and receptacles are cross-interchangeable with Crouse Hindâ„¢ part# ENP5201 plugs and receptacles and Hubble-Killiark part# UGP-20231 ACCEPTOR plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness.
Suggested Applications:
Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present.
Specifications
Amp Rating: 20 Amp Continuous Service
Dimensions: Cord-50 Feet
Configuration: 3 Pole 2 Wire 3 Pole 2 Wire
Suitable Plug Cable Diameter: .538†to .639â€
Wiring: 50` 12/3 SOOW Cable Terminated w/ (1) 125/250V Explosion Proof Plug and (3) 20 Amp Receptacles
Voltage: 125 Volts or 250 Volts
Cord Cap: Explosion Proof Plug EPP-250-2P-20A
Receptacle Specs: 3 Inline Recptacles
Configuration: 3 Pole 2 Wire 3 Pole 2 Wire
Materials: Copper Free Aluminum
Dims:- Single Receptacle- 3"-W X 5.69"-D X6.13"-H
Mating Plugs: ****EPP-15A, EPP-20-A****
Finish: Epoxy Powder Coat
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
