Larson Explosion Proof, Waterproof Fluorescent Lights - 2 Lamp - 4 Foot - Pendant and Surface Mount

PuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please email us at info@purilite.ca to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.
Made in the USA
The Larson Electronics EPL-48-2L-PNSF Explosion Proof Fluorescent Light Fixture is NRTL Listed for United States and Canada and rated Class 1 Division 1 and  Class 1 Division 2
for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist. The unit carries a T6 temperature rating, it is also approved for Paint Spray Booths.
The EPL-48-2L-PNSF fixture is a 4 foot long, 2 lamp, Class 1 Division 1 and Class 2 Division 1 and 2 explosion proof fluorescent light which is also approved for use in paint spray booth applications. This T6 temperature rated fixture comes standard with two fluorescent lamps. Lamp choices include T5HO, T12HO, and T8. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is available with a variety of lamp options. The EPL-48-2L-PNSF provides operators in hazardous locations with a reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability.
We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. However, we standardize on the T-5HO bulbs mostly for longevity and high output. However, many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing plants operate in very cold conditions, and T-12HO bulbs operate well in those environments. Larson Electronics offers a T12VHO lamp option, 110 watt Very High Output lamps make this fixture an ideal replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class 1 Division 1 rated lights. *However, the 110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications.
Energy Consumption Comparison
T5HO
T8
LED
Wattage
108 watts
64 watts
48 watts
Amp Draw @ 120V AC
0.9 amps
0.54 amps
0.4 amps
Amp Draw @ 277V AC
0.39 amps
0.24 amps
0.18 amps
Amp Draw @ 12V DC
9 amps
5.34 amps
4 amps
Amp Draw @ 24V DC
4.5 amps
2.67 amps
2 amps
Lamp Life Expectancy
20,000 hours
24,000 hours
50,000 hours
Color Temperature
5000K / 4100K
4100K
5300K
Operation cost per year
$34.69
$20.56
$15.42
Standard Bracket Mounts
: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.
This fixture ships with both pendant and surface mount. It comes equipped with surface mount but is shipped with a pendant mount leg. The installer swaps out the surface mount leg for the pendant mount leg to pendant mount the fixture.
Made in USA Quality
Lamp Options
1. Each unit dialectically tested.
F54-T5/850/HO
– 54 watt, 5000 lumens per bulb, 20,000 hours life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF .98 (Suffix –50KT5)
F54-T5/841/HO
- 50 watt, 4450 lumens per bulb, 20,000 hour life, 4100 Kelvin color, CRI 85 (Suffix -41KT5)
F48-T12/HO
– 60 watt, 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color (Suffix –T12HO)
F32-T8/841
– 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color (Suffix –T8)
T12HB
with magnetic ballast for high heat configurations ("hot box" explosion proof light applications) - 60 watt, 4050 lumens per bulbs - This bulb, ballast and wiring configuration is designed for applications to 165 degrees C.

Specifications
NRTL Listed for United States & Canada
United States & Canada NRTL Listed for 
Dimensions: W-11.25"  L-52"  H-8.5 "
Weight: 65 Lbs
Total Watts: 108watts*
* Total Watts: 108wattsAmbient Operating Temp Range: 

Operating Temp Rating: T6 Rated

Minimum Operating Temp: -30 C

Maximum Case Temp: 90 C
Voltage:  Universal 120V-277V 50/60 Hz
Total Lumens: STD-T5-HO Bulbs 10,000
Lamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours
Efficiency: STD-T5-HO Bulbs  92 Lumens per Watt
Ambient Operating Temp Range:   -20 C to 70 C*

Operating Temp Rating: T6 Rated

Minimum Operating Temp: -30 C

Maximum Case Temp: 90 C

Operating Temp Rating: Ambient Operating Temp Range:  -20 C to 70 C*

T6 Rated

Minimum Operating Temp: -30 C

Maximum Case Temp: 90 C
Minimum Operating Temp: Ambient Operating Temp Range:  -20 C to 70 C*

Operating Temp Rating: T6 Rated

-30 C

Maximum Case Temp: 90 C
Maximum Case Temp: Ambient Operating Temp Range:  -20 C to 70 C*

Operating Temp Rating: T6 Rated

Minimum Operating Temp: -30 C

90 C
Beam Angle: N/A
Color Temp: varies with bulb choice
Mounting:  Surface Standard - Pendant Optional
Wiring Hub: 1/2 inch threaded
* Total Watts: 108wattsAmbient Operating Temp Range: 

Operating Temp Rating: T6 Rated

Minimum Operating Temp: -30 C

Maximum Case Temp: 90 C
* Total Watts: 108wattsAmbient Operating Temp Range: 

Operating Temp Rating: T6 Rated

Minimum Operating Temp: -30 C

Maximum Case Temp: 90 C