Explosion Proof Portable LED Light Tower - Extends to 20ft - Wheeled Mobile Unit - Four 150 Watt LED
Explosion Proof Portable LED Light Tower - Extends to 20ft - Wheeled Mobile Unit - Four 150 Watt LED
| EPL-ML-20F-4X150LED-RT 600 Watt C2D1 Light Tower | Ratings/Approvals |
| Lamp Type: Cree LED | Class 1 Division 1 & 2, Groups C and D |
| Voltage:Â 120-277V AC 50/60Hz | Class 2, Division 1 - 2, Groups E,F,G |
| Total Watts: 600W | Class 3 |
| Total Lumens: 70,0000 | 12-20 Ft Light Mast |
| Luminous Efficacy: 116.67 Lm/W | Steel Construction |
| Color Temp: 5000K, 4000K, 3000K | Â |
| Length:Â 12 feet -Â 20 feet | Â |
| Materials: Steel | Â |
| Finish: Powder Coated - Gloss Blue | Â |
| Operation: 1,000lbs Hand Winch | |
| Cable: 3/16" Aircraft Cable | |
| Wiring: 10 foot SOOW cord | |
| Cord Cap: 2P3W Pin/Sleeve EXP Plug | |
| Shipping: Common Freight | |
| Options: Length- Mounting-Fixtures/ Call Us for Special Requirements |
| Made in the USA The EPL-ML-20F-4X150LED-RT Explosion Proof LED Light Tower from Larson Electronics is a mobile twenty foot three stage telescoping light tower equipped with four high output Class 1 Division 1 & 2 and Class 2 Division 1 & 2 Cree LED light fixtures producing approximately 70,000 lumens. This light tower collapses to twelve feet and features a removable mast head for storing mounted light heads when not in use. This explosion proof light tower is an ideal solution for operators who need a fully portable yet easy to operate light system capable of illuminating large areas within classified areas where flammable gases, vapors, and dusts exist or stand the potential to exist. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* Larson Electronics’ EPL-ML-20F-4X150LED-RT telescoping steel light tower mast is designed to allow operators to quickly and safely deploy four of our 150 watt explosion proof LED light fixtures to heights up to twenty feet for effective light coverage. This light boom can be extended to 20 feet for maximum area coverage and collapsed to 12 feet for applications where a footprint smaller than 12 feet is required. The tower is constructed of square steel tubing and section has a minimum of 1` overlap when fully extended. The mast is extended to its full height using an included 1,000 lbs hand winch with 3/16" galvanized cable. This is a heavy duty unit designed for use in demanding conditions and for overall longevity in difficult construction environments with heavy duty steel construction for maximum durability. We make this lighting solution in the United States. Larson Electronics tower lights are designed for industrial, commercial, emergency response, and military applications where the operators are working in harsh, destructive environments and the operators income or mission success are dependent on dependable, durable lighting. Included with this light tower are four of our Explosion Proof 150 watt LED fixtures producing a combined total of approximately 70,000 lumens at only 600 watts. Each fixture produces 17,500 lumens of high intensity light while drawing only 150 watts @1.25 amps from a 120 volt electrical system. These Explosion Proof LED light fixtures are Class 1, Division 1 & 2, Groups C & D and Class 2, Divisions 1 & 2, Groups E, F & G rated for use within the most demanding hazardous locations. The lights are wired to an explosion proof junction box at the base of the tower, and 10 foot of SOOW cable terminated in an explosion proof 2-pole 3-wire pin and sleeve cord cap is included. | |||||
|
|
|||||
| The light tower features an extendable tower assembly that can be adjusted from to 20 feet in height for maximum coverage. A single hand crank allows operators to easily raise or lower the tower as needed, and a removable lamp mounting platform allows removal of the lamp assembly for easier transport and storage. The tower is constructed of heavy gauge steel for durability, and a tough powder coat finish provides protection against rust and corrosion. The base of the tower is fitted with four solid wheels to allow easy positioning; the operator can simply roll it into the desired location as needed. Once the tower is positioned, the four stabilizing outriggers are extended from the side of the base platform for leveling the tower before deployment. This tower is fitted with four explosion proof 150 watt LED lamps producing a combined total of approximately 70,000 lumens in a wide flood pattern. The lamps feature a finned aluminum housing to dissipate heat and tempered glass lens for resistance to heat and shocks. Each lamp is mounted to the tower arm via a trunnion style U-bracket which allows operators to adjust each lamp independently for optimal light dispersion. Each individual explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Suggested Applications: Construction sites, frac pads, oil rigs, oil derricks, emergency services, industrial plants, mining and excavation and anywhere a mobile light source with large area coverage capability is needed. Â | |||||
| Â |
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
