1 1

56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI Network

56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI Network

$2,302.00 CAD
$2,302.00 CAD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
Specifications / Additional Information
HALP-ADC-48-2L-LED-D-V2 Hazardous Area Dimmable LED Offshore Light Ratings/Approvals
UL Listing: United States - Canada Class I Division 2, Groups A, B, C, D
Dimensions: 8.25"W x 52"L x 7"H Class II, Division 2, Groups F, G
Weight: 8 Lbs UL 844
Total Watts: 56 watts (28 Watts Per Lamp) UL 1598A Marine Type (Salt water)
Total Lumens: 7,000 (3,500 Per Lamp) California Title 24 Compliant
Voltage: Universal 120-277V AC 50/60 Hz T4A Temperature Rated
Lamp Life Expectancy: 50,000 Hours USCG Approved
Luminous Efficacy: 120 Lumens per Watt 0-10V Dimming Capability
Temp Range: -30°C to +85°C Password Protected Network Controls
Beam Angle: 150° No Programming Required
Color Temp: 5600K, 4500K or 3000K Modbus TCP/IP Connectivity
Minimum Operating Temp: -30°C DALI or Push Dim
Maximum Case Temp: 90°C PWM Output Signal
Mounting: Flange Type Surface Mount or Pendant Mount  
Wiring Hub: 1/2` or 3/4" Threaded  
   
Signal Converter Specs  
Watts: 0.5W  
Input Voltage: 90-306V AC or 127-431V DC @ 47- 63Hz  
Current: 0.1A  
Input Signal: DALI or Push Dim  
Output Channels: 4  
Output Signal: PWM  
Output Logic: Active High or Active Low  
Dimming Range: 1-100%  
Relay Switch: 240V AC, On/Off  
Operating Temperature: -30? to +60?  
Housing Material: Fully Isolated Plastic  
Connection: Terminals (TB1, TB2 and JP1)  
   
Analog Output Module Specs  
Dimensions: 1.41" x 3.88" x 3.1"  
Weight: 4.8 oz  
Network Type: 10/100 Base-T Ethernet Port (Static IP address assignment or DHCP, HTTP Port Selectable)  
Protocols: HTTP, XML, Modbus TCP/IP  
Voltage: 9-28V DC  
Max Current: 92mA-163mA @ 24V DC (10 Mbps Network Speed; 126mA-198mA @ 24V DC (100 Mbps Network Speed)  
Configurable Channels: 5  
Output Ranges: 0-5V, 0-10V, ±5V, ±10V, 4-20mA (Software Selectable)  
Resolution: 16-bit DAC (0-65535)  
Current Output (Voltage Mode): 10mA Max (Min Load = 1K), 30mA Max Short Circuit  
Voltage Output Inaccuracy: ±0.2% FSR Includes Offset Error, Gain Error and Non-linearity Error  
Max Load Capacitance: 20nF (no load), 5nF (1K load)  
Current Output Range: 4-20mA  
Output Compliance Voltage: 11.50V Minimum  
Isolated Power Supply: Internal DC to DC Converter  
Isolation: Galvanic, 1500V AC  
ESD Protection: Integrated, 15kV Protection  
Output Protection: Integrated Over-temperature, Open-line and Short Circuit Protection  
Output Alarms: Open Current Loop, High Internal Temperature
Output @ Power Up: Programmable  
LED Indicators: (8) Power On, Fault Condition (Channels 1-5), Network Linked, Network Activity
Operating Temperature: -40°C to 65.5°C
Housing Material: Lexan 940 Polycarbonate Plastic Toll Free: 1-800-369-6671
Mount: Surface, Wall or DIN Rail Intl: 1-214-616-6180
Password Protection: Yes @ Setup (Base 64 Encoding, 13 Characters)
Connectors: 12-position/Removable (Power/Outputs), 8-pin RJ-45 (Network)
' Product Overview '
Made in the USA The Larson Electronics HALP-ADC-48-2L-LED-D-V2 Hazardous Location LED Light is a U.S./Canada UL Listed connected lighting solution for Class I Division 2 Groups A, B, C and D locations. Equipped with a DALI-PWM signal converter, this hazardous location LED light has a T4 temperature rating and carries a United States Coast Guard approval, making it ideal for applications such as oil rigs, ships, offshore applications, petrochemical, manufacturing, chemical storage, and water treatment centers. Controls for the dimmable LED unit is facilitated by an analog output module using Modbus TCP/IP protocol. No programming is required during setup. This four foot long, two lamp LED fixture is ideal for operators seeking a top quality hazardous location light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The HALP-ADC-48-2L-LED-D-V2 hazardous area LED light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class I Division 2 rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Eight corrosion resistant plastic latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This LED light fixture features 0-10V dimming capabilities. This gives operators the ability to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications. Aevum Network Controlled Lighting Solution: The Aevum Network Controlled Lighting Solution from Larson Electronics enables connected and intelligent illumination using cutting-edge and existing networks. Using Modbus TCP/IP or DALI (for fixtures with dimming features), businesses can seamlessly control lights and sensors from remote locations, without traditional light switches. Web-based panels facilitate real-time monitoring of connected equipment and allows operators to switch units on/off, configure activation settings and more. Businesses may utilize their own systems and software with these controllers, ensuring robust flexibility and cost savings (no contracts). The Aevum Network Controlled Lighting Solution can improve productivity in the workplace by automating basic lighting controls and making lighting controls widely accessible in the facility, via local networks or the internet. Operators also have the option to monitor the status of fixtures from a remote location, which can improve maintenance and reduce downtimes. Larson Electronics offers equipment and accessories required for a DALI network. Controls: Controls for the LED fixture is accessible using a web-based control panel. Compatible with HTTP, XML, or Modbus TCP/IP protocols, network configuration is accessible using web-based pages (no programming required). Operators can monitor or setup controls from a remote area using the internet or local IP network and any standard web browser. Protective features include: integrated 15kV protection (ESD protection), integrated over-temperature, open-line and short circuit. Output alarms can be set for open current loop and high internal temperature. LED indicator lights on the device provide the real-time information about power, fault condition for all 5 channels and network link/activity. Password protection for the setup page is available (13 characters maximum). Operators can upload scripts during setup using the web-based panel. Signal Converter: The LED lighting system is equipped with a signal converter, which converts DALI signals to PWM signals. This component features built-in push dim functionality and a comprehensive dimming range of 1-100%. A total of four output channels can be found on the DALI-PWM signal converter. Selectable output PWM logic includes active high (factory setting) or active low.
Click Photo to Enlarge
We now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light`s performance. This 0-10V dimming two lamp HAZLOC LED linear fixture is lighter in weight and produces more light than hazardous location fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T8 bulbs. The HALP-ADC-48-2L-LED-D-V2 is UL 844 rated and Class I Division 2, Groups A, B, C, D approved. This fixture also carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications. This lamp offers the extreme durability, high efficiency and long lamp life of high power LEDs in a proven hazardous location fixture design, making it a reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and the included LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. The 0-10V dimming capabilities of the HALP-ADC-48-2L-LED-D-V2 offers energy savings and easy brightness control. Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting. The 28 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 3,500 lumens at 125 lumens per watt, for a combined 7,000 total lumen light output. A HAL-48-2L-T8 hazardous location fluorescent light, with a combined total of 64 watts, draws 0.54 amps at 120 volts AC. This LED version of the same light, with a total of 56 watts, draws only 0.47 amps at 120 volts AC. The HALP-ADC-48-2L-LED-D-V2 is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications.
Energy Consumption Comparison
T5HO T8 LED
Wattage 108 watts 64 watts 56 watts
Amp Draw @ 120V AC 0.90 amps 0.54 amps 0.47 amps
Amp Draw @ 220V AC 0.49 amps 0.29 amps 0.25 amps
Amp Draw @ 240V AC 0.45 amps 0.27 amps 0.23 amps
Amp Draw @ 277V AC 0.39 amps 0.24 amps 0.20 amps
Amp Draw @ 12V DC 9 amps 5.34 amps 4.67 amps
Amp Draw @ 24V DC 4.5 amps 2.67 amps 2.34 amps
Lamp Life Expectancy 20,000 hours 24,000 hours 50,000 hours
Color Temperature 5000K / 4100K 4100K 5600K
Operation cost per year (12hs/day @ 12c/kWh) $56.77 $33.64 $29.43
Network: The analog output module is equipped with five configurable channels. This unit works with 10/100 Base-T ethernet ports and allows static IP address assignment or DHCP, HTTP port selectable during setup. Compatible with 9-28V DC, the module features a 12-position, removable connector for power and outputs, as well as an accessible 8-pin RJ45 port. Operators can mount the device on walls, surfaces or din rails for space-saving benefits. Mounting Options: Unless otherwise specified, our standard, most popular configuration is the flange mount shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.
Surface Mount (Standard)
Standard Flange Brackets: Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture. The mounting holes are 38.25" on center apart along the top of this hazardous location light. The mounting holes are 7.2" on center across the top of the light.
Pendant Mount (Optional)
Standard Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture is equipped with either two 1/2" or 3/4" NPT hubs, one on each end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to one of the NPT hubs and tied in to the fixture’s lead wires, completing the electrical connection. The remaining pendant hub provides support for the opposite end of the fixture. Suggested Applications: The HALP-ADC-48-2L-LED-D-V2 is designed for DALI lighting networks, remote lighting networks, marine, wet, damp locations where corrosion resistant fluorescent lights are required or are already present. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.

Shipping and delivery Information

Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.

For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.

The PuriLite Peace of Mind 30-day money back guarantee

Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.

1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.

If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.

Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!

Sustainability & Ethical Sourcing

At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.

♻️ Sustainable Practices

  • We prioritize durable materials that extend the product life cycle and reduce waste.
  • Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
  • Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.

🤝 Ethical Sourcing

  • We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
  • All suppliers are carefully vetted for compliance with environmental and ethical standards.
  • We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.

🌍 Our Ongoing Commitment

We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.

Ver todos los detalles
Producto Subtotal de productos Cantidad Precio Subtotal de productos
56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI Network
56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI NetworkPL3-HALP-ADC-48-2L-LED-D-V2
56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI NetworkPL3-HALP-ADC-48-2L-LED-D-V2
$2,302.00/unidad		 $0.00
$2,302.00/unidad $0.00