10W Far-UV Sanitation Light - (1) 222 nm UVC Microplasma Board - Wall Mount w/ (2) 6" Arms - 10' Cord
10W Far-UV Sanitation Light - (1) 222 nm UVC Microplasma Board - Wall Mount w/ (2) 6" Arms - 10' Cord
| IND-AR-UML-FUVC-MP-6-1L-V1-120V-10C UV-C Sanitation Light | Ratings |
| Unit Type: Far UV-C Microplasma Board | 222nm Germicidal Light |
| Lamp Technology: UV Microplasma | Kills 99% of Viruses and Other Germs |
| Dimensions: - | Mercury Free Lamp |
| Weight: - | Instant-On Lamp, No Warm Up Time |
| Voltage: 120V | More Efficient & Effective than UVC Lamps |
| Total Watts: 10W | No Harmful UVC Emissions |
| Total UV-C Output: - | No Block Off/Bandpass/Cutoff Filters) Needed |
| Effective UV Intensity: - | Skin Safe & Eye Safe |
| Expected Lifespan: 6,000+ Hours | Ozone Free |
| UV Wavelength: Far UV-C, 222nm | Low Heat Output |
| Lamp Type: Microplasma Board | EPA Reg. No 98409-1 |
| Lamp Base: - | EPA Est. No. 98409-TX-1 |
| Replacement Lamp: FRL-EMP-FUVC-MP-10-2X2-KT-120V | |
| Beam Angle: - | |
| Lighting Configuration: Flood Pattern | |
| Reflectors: U-reflector at End of Arms | |
| Driver: Enclosed | Special Orders - Requirements |
| Operating Temperature Range: - | |
| Housing: - | |
| Mounting: Wall Mount w/ (2) 6" Arm Extensions - 10" Total Extension | |
| Cord: 10' 16/3 SOOW Cord w/ Cord Cap | |
| Cord Cap: 5-15 Straight, L5-15 Twist or Pigtail | |
| ***PLEASE NOTE: UV-C light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. To prevent exposure, do not operate the device in any application that allows UV-C light to be visible during operation. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating.*** |
This unit is Made In USA - Manufactured in Texas
The Larson Electronics IND-AR-UML-FUVC-MP-6-1L-V1-120V-10C Far-UV Sanitation Light disinfects 99% of viruses, bacteria, mold and spores on surfaces and in the air within occupied areas. Equipped with two 6" arms, this eye and skin safe disinfection unit uses one 10-watt microplasma board that emits far-UV 222 nm germicidal light. The UV disinfection light comes with an enclosed driver and is compatible with wall mounting (above eye level) installations.
*Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria. *
The IND-AR-UML-FUVC-MP-6-1L-V1-120V-10C UV sanitation fixture is a powerful lighting solution for rooms and occupied areas. This 10-watt unit consists of one microplasma board that provides 222nm far UV-C output. Equipped with an expected lifespan of 6,000+ hours, the light emits a flood beam pattern and is replaceable. The far-UV unit is capable of achieving up to 3 log (99.9%) cumulative disinfection per day. U-reflectors located at the end of the arms enhance light distribution by reflecting UV rays downwards.
Far-UV 222 nm light is considered to be eye and skin safe for humans, allowing the lamps to be used in occupied areas safely with minimum risk. The 222 nm wavelength does not penetrate the cornea of the eye and cannot impose corneal impairment. Additionally, this UV band is blocked by the top layer of skin (stratum corneum) which protects underlying cells from damage. Exposure to far-UV 222 nm lamp does not cause skin inflammation or swelling. Due to these safety benefits, extensive protective clothing is not required when using this type of sanitation light in occupied areas.
Benefits of Excimer Far UV Lamps: When it comes to Far-UV lamps, there are few options in the skin-safe and eye-safe wavelengths. Similar to LED lamps, excimer lamps provide “instant-on†startup, and do not require a warmup period; excimer lamps are at 100% peak output when switched on. Most lamp technologies that do product UVC use mercury in the manufacturing process. Excimer lamps have ZERO mercury, making them more environmentally friendly. Excimer lamps can be tuned to specific wavelengths (222nm wavelength for this product) and produce no harmful UVC radiation or wasteful visible light and infrared light. Excimer lamps are more efficient at converting electricity (input power) into UV irradiance, which reduces the heat output from excimer lamps over other technologies. Fluorescent, amalgam, low-pressure mercury, and high-pressure mercury lamps do not product as tight of a wavelength and generate more heat, both of which wastes energy for the UV sanitation application. Excimer lamps have a higher average UV irradiance per square inch and have a higher photon emission over other lamp technologies. Being safe for use in occupied areas, instant-on power, mercury free, higher UV output, and low heat output make Far-UV excimer lamps the preferred choice for UV sanitation and disinfecting applications.
|
|||||||||
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
