25 KVA Power Distribution - 480V 3PH to 120/240V 1PH - Galvanized Steel Frame - SS Hardware
25 KVA Power Distribution - 480V 3PH to 120/240V 1PH - Galvanized Steel Frame - SS Hardware
| MGS-25K-480V3P-10C-GLVD Power Distribution Substation | Ratings |
| Line In: 25` 4/0 Cord | UL 1640 Portable Power-Distribution Equipment |
| Primary Voltage: 480V 3PH | NEMA 3R Indoor or Outdoor Use |
| Primary Disconnect: 480V 3PH Fused N3R | Made in the USA |
| Primary Protection: Disconnect | Galvanized Steel Frame |
| Transformer: 25 KVA 480V 3PH to 120/240V 1PH N3R |  |
| Secondary Voltage: 120/240V 1PH |  |
| Secondary Panel: 100A 120/240V 1PH MCB Panel N3R | |
| Secondary Breakers: (2) 30A, (8) 20A | |
| Secondary Receptacles: (2) 30A Twist Lock [250V], (8) 20A Duplex GFCI [120V] | |
| Secondary Protection: GFCI | |
| Form Factor: Square tube frame w/ 1/8" thick, 2" tubing, skid pockets, top pick eye & locking casters | |
| Materials: Galvanized Steel Frame w/ SS Hardware | |
| Dimensions: W-48" X D-48" X H-60 | |
| Weight: 650lbs | |
|  | |
| Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. | *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* |
| This unit is Made In USA - Manufactured in Texas The Larson Electronics MGS-25K-480V3P-10C-GLVD power distribution substation converts 480V AC three phase electrical current to single phase 120/240V AC. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. Designed for marine environments, the power distribution system is equipped with stainless steel components and a galvanized steel frame, which offers superior protection against corrosion.  The MGS-25K-480V3P-10C-GLVD portable power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. On the primary side, operators connect 480 volt line-in power using a 25` 4/0 cord. On the secondary side, operators connect to two twist lock receptacles for 240V equipment and to eight GFCI duplex receptacles for 120V equipment. A 25` 4/0 cord brings 480V three phase power to the NEMA 3R 480V three phase primary fused disconnect and passes 480V through to the transformer. The NEMA 3R 25 KVA transformer converts 480V three phase power to 120/240V single phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 100-amp, 120/240V single phase main circuit breaker panel. This secondary panel contains two 30-amp breakers protecting two 30-amp, 250V twist lock receptacles and eight 20-amp breakers protecting eight 20-amp GFCI duplex 120V receptacles. All receptacles are equipped with weatherproof covers. |
| Protective Construction: The transformer is mounted on a 1/8†thick galvanized steel frame and mounting platform for protection against corrosive elements and superior durability in marine environments. The load center/distribution assembly is mounted to the standard 2 inch square stainless steel tubing frame resulting in an extremely stable, durable, and well protected power distribution platform. An integral 3" x 6" x 3/8" rectangular tube, stainless steel skid pockets provide forklift access, and a top located lifting eyelet allows easy lifting with cable or chain hooks. This power distribution system is designed for outdoor use and applications including but not limited to, plant maintenance, hazardous location operations, as a welding station, shows, exhibits, and marine applications. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or to discuss your specific requirements. |
|  |
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
