112.5 KVA Transformer Power Distribution - 480V to 208Y/120V 3PH - Camlocks Input/Output
112.5 KVA Transformer Power Distribution - 480V to 208Y/120V 3PH - Camlocks Input/Output
| MPD-480CL-3P-112.5KVA-208.120-1X200ACL-1X100ACL Power Distribution Substation | Ratings |
| Line-In Cord: Customer Provided | Max OCP Primary: 400A @ 480V |
| Line-In Cord Cap: 600V/200A Female Cam-Locks (Red, Orange, Yellow, Gray, Green) | Max OCP Secondary: 400A @ 208Y |
| Primary Voltage: 480/277V 3PH | UL 1640 Portable Power-Distribution Equipment |
| Primary Disconnect: | NEMA 3R Indoor or Outdoor Use |
| Primary Panel: 480/277V 400A MLO N3R | Made in the USA |
| Primary Breakers: - | |
| Primary Receptacles: 600V/400A Male Cam-locks (Red, Orange, Yellow, Gray, Green) | |
| Primary Protection: Weatherproof Covers | |
| Transformer: 112.5 KVA 480V to 208Y/120V 3PH N3R | |
| Secondary Voltage: 208Y/120V 3PH | |
| Secondary Panel: 208Y/120V 400A MLO N3R | |
| Secondary Breakers: (1) 200A, (1) 100A | |
| Secondary Receptacles: (2 Sets) Female Cam-locks (Black, Red, Blue, Gray, Green) | |
| Secondary Protection: Weatherproof Covers | |
| Form Factor: Square tube frame w/ 1/8" tubing, skid pockets, top pick eye & locking 8Â locking casters | |
| Frame Materials: Powder coated steel frame | |
| Dimensions: 48Â X 48Â X 80Â | Fax:1-903-498-3364 |
| Weight: 850 pounds | |
| Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. | *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* |
This unit is Made In USA - Manufactured in Texas
The Larson Electronics MPD-480CL-3P-112.5KVA-208.120-1X200ACL-1X100ACL power distribution substation converts 480V AC three phase electrical current to 208Y/120V three phase. This unit provides operators the ability to safely tap into 480V AC and distribute 208Y/120V power from a variety of sources including generators and direct grid power.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*
Portable Power Distribution Purpose and Use
The MPD-480CL-3P-112.5KVA-208.120-1X200ACL-1X100ACL portable power distribution system gives operators the ability to power their 208Y/120V equipment from a single system. On the primary side, operators connect 480 volt line-in power to a set of 400-amp female cam-locks inputs (red, orange, yellow, gray and green). A set of 400-amp male cam-lock outputs (red, orange, yellow, gray and green) are also available on the primary side for 480/277V equipment. On the secondary side, operators connect to two sets of 120V female camlocks output for 120V equipment.
Operation: A set of 400-amp female cam-locks (red, orange, yellow, gray and green) brings 480V three phase power to the NEMA 3R 400-amp, 480/277V three phase primary main lug only panel, which contains one set of 400-amp male cam-lock outputs (red, orange, yellow, gray and green) for 480/277V equipment. The NEMA 3R 112.5 KVA transformer converts 480V three phase power to 208Y/120V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 400-amp, 208Y/120V three phase main lug only panel. This secondary panel contains one 200-amp breaker protecting one set of 120V, 315-amp female cam-lock outputs (black, red, blue, gray and green), and one 100-amp breaker protecting one set of 120V, 315-amp female cam-lock outputs (black, red, blue, gray and green). All receptacles are protected by weatherproof covers.
|
||||||||||||||||
| Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customerâ„¢s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or to discuss your specific requirements. | ||||||||||||||||
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
