1 1

25 KVA Portable Power Distribution - 600V to 120/240V 1-phase, (10) Receptacles, 25' SOOW Cord - N3R

25 KVA Portable Power Distribution - 600V to 120/240V 1-phase, (10) Receptacles, 25' SOOW Cord - N3R

$20,700.00 CAD
$20,700.00 CAD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
Specifications / Additional Information
MPD-CD1-BS.50AB-SC25SZ-FZ-5.N16-5.N10-M1 -Temporary Power Distribution System Ratings
Line-in Cord: 25' #6/3 AWG TYPE SOOW Cord Max Primary OCP: 50A @ 600V
Line-in Cord Cap: Not Included - Requires Minimum Use Device 50A @ [600V] (**Customer Provided**) Max Secondary Output: 104.2A @ 240V
Primary Voltage (V): 600V AC NEMA 3R Indoor or Outdoor Use
Primary Phase (PH): 1-Phase (1PH) NEMA 3R In-Use Weather Shield
Primary Frequency (HZ): 60 Hz (60-cycles) Made in the USA
Primary Breaker: (1) 50A 2P MCCB [600V] NRTL Certified to UL 1640
Primary Protection: MCCB Circuit Breaker NRTL Certified to CSA C22.2 No. 14
Transformer (KVA): 25KVA 600V to 120/240V 1PH N3R  
Secondary Voltage (V): 120/240V AC Powder Coat Finish Standards:
Secondary Phase (PH): 1-Phase (1PH) Complies with ASTM D-523
Secondary Frequency (HZ): 60 Hz (60-cycles) Complies with ASTM D-3359
Secondary Panel: 120/240 1PH 104.2A MLO N3R Complies with ASTM D-522
Secondary Breakers: (5) 20A 2P GFCI-MCB [250V]; (5) 20A 1P MCB [125V] Complies with ASTM D-3363
Secondary Outlets: (5) 6-20R NEMA SPLX [250V]; (5) 5-20R NEMA DPLX GFCI [125V] Complies with ASTM D-2794
Secondary Protection: MCB Circuit Breakers; GFCIs; Weather-proof Covers  
Form Factor: Blue Powder Coated MGL Dolly Cart w/ Run Flat Tires  
Front Cover: Weatherproof Lid w/ Front-located Handle and Lock  
Cover Locking Position: Upward w/ Internal Locks on Both Sides of the Lid  
Vibration Isolators: Transformer and Breakers  
Drain Plug: Panel  
Cart Material: Steel  
Cart Finish: High-strength TGIC Polyester Powder Coated Blue
Cart Handle Orientation: Horizontal
Lifting Eyelet: (1) Center Point Toll Free: 1-800-369-6671
No-flat Tires: (2) Black Intl: 1-214-616-6180
Dimensions: 41"-W x 30"-D x 66.5"-H
Weight: 350 lbs
Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*
' Product Overview '
Made in Texas The Larson Electronics MPD-CD1-BS.50AB-SC25SZ-FZ-5.N16-5.N10-M1 temporary power distribution system converts single-phase 600V AC electrical current into single-phase 120/240V AC. This unit provides operators the ability to safely tap into and distribute 600V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MPD-CD1-BS.50AB-SC25SZ-FZ-5.N16-5.N10-M1 temporary power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. Operation:
  • Primary Voltage: 1-phase 600V AC
  • Primary Receptacles: N/A
  • Transformer: 25KVA 600V to 120/240V 1PH N3R
  • Secondary Voltage: 1-phase 120/240V AC
  • Secondary Receptacles: (5) 6-20R NEMA SPLX [250V]; (5) 5-20R NEMA DPLX GFCI [125V]
*See specification table at the top of the page for more information about the power distribution system. Protective Construction: A weatherproof flip cover at the front of the unit can be lifted upwards via an accessible handle, which serves as protection for (primary and secondary) breakers and receptacles in rugged environments when deployed at the site. Operators may access locks on the door and on the ears (accessible from the inside of the lid) of the panel. The panel can be positioned upwards and locked in place for easy access to receptacles and breakers. A drain plug on the panel helps the power distribution system achieve a NEMA 3R rating, allowing the unit to be used in both indoor and outdoor locations. The transformer is protected by vibration isolators that reduce damage to exterior jacket of wiring components and decrease noise during operation. In MGL-style power distribution systems, the presence of vibration isolators ensures wiring between the transformer and panel is well protected and does not have to be frequently replaced. Vibration isolators can also be found on the breakers, which protect the breakers from damage, prevent loose bolts/nuts and reduce overall noise during use in the field. The power distribution system is constructed of steel with a polyester powder coated blue finish for durability against dirt, moisture and mild corrosion. This special coating creates a high-strength barrier for protection from accidental bumps and scratches. The TGIC polyester powder coat finish offers reliable resistance against chemicals, UV light (sun light) and degrading elements in outdoor locations. Our powder coating solution ensures robust color retention for many years without fading. Custom colors, such as black, grey, desert tan or forest green, and galvanized finishes are available upon request. Non-standard powder coat colors or galvanized finishes may increase price and lead times. The transformer and load center/distribution assembly is mounted to a standard steel cart style frame resulting in an extremely stable, durable, and mobile power distribution platform. Two rubber tires and a cart style mounting platform provides easier substation mobility, and a center point lift eye allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: All units are built in accordance to NFPA 70 (National Electric Code) and NRTL certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or to discuss your specific requirements.

Shipping and delivery Information

Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.

For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.

The PuriLite Peace of Mind 30-day money back guarantee

Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.

1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.

If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.

Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!

Sustainability & Ethical Sourcing

At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.

♻️ Sustainable Practices

  • We prioritize durable materials that extend the product life cycle and reduce waste.
  • Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
  • Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.

🤝 Ethical Sourcing

  • We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
  • All suppliers are carefully vetted for compliance with environmental and ethical standards.
  • We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.

🌍 Our Ongoing Commitment

We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.

Ver todos los detalles
Producto Subtotal de productos Cantidad Precio Subtotal de productos
25 KVA Portable Power Distribution - 600V to 120/240V 1-phase, (10) Receptacles, 25' SOOW Cord - N3R
25 KVA Portable Power Distribution - 600V to 120/240V 1-phase, (10) Receptacles, 25' SOOW Cord - N3RPL3-MPD-CD1-BS.50AB-SC25SZ-FZ-5.N16-5.N10-M1
25 KVA Portable Power Distribution - 600V to 120/240V 1-phase, (10) Receptacles, 25' SOOW Cord - N3RPL3-MPD-CD1-BS.50AB-SC25SZ-FZ-5.N16-5.N10-M1
$20,700.00/unidad		 $0.00
Agotado
$20,700.00/unidad $0.00