6,000 Watt Light Plant - 11,000 Watt Generator - Water Cooled Diesel Engine - 30' Telescoping Tower
6,000 Watt Light Plant - 11,000 Watt Generator - Water Cooled Diesel Engine - 30' Telescoping Tower
| WCDE-6MHL Mobile Light Tower | Protection |
| Genset Specs: | 11KW Kubota Brushless Genset |
| Genset: Kubota GL11000TM | 100 Gallon External Fuel Cell |
| Engine: Kubota D722 16.3 HP | Glow Plugs Factory Installed |
| Engine Type: Vertical, liquid-cooled, 4-cycle diesel engine | Up to 45 Hour Continuous Operation |
| Engine Speed: 3600 RPM | 11.5` to 30` Light Mast |
| No. of Cylinders: 3 | Steel Construction Trailer |
| Generator: 11KW 2-Pole Brushless | Large Area Coverage |
| Voltage: 120/240V Single Phase | 660,000 Total Lumen Output |
| Battery 12V @ 36aH | Independently Adjustable Light Heads |
| Fuel Cell Capacity: 100 Gallons - External Tank w/ Anti-Splash Baffles | Dial-in Adjustability per light head |
| Fuel Delivery: Electric | IP67 Waterproof MH Fixtures |
| Sound Level: 68 dB - Full load @ 23` away | All Equipment Mounted on a 14` x 8` Trailer |
| Cold Weather Package: Glow Plug Factory Included | Steel Trailer w/ Industrial Grade Paint Finish |
| External Grounding | |
| Light Mast Specs | Towable Height Under 13` w/ Light Heads |
| Tower Length: 11.5` to 30` | 4-Point Outrigger System |
| Lamp Qty: (6) | Withstands 65Mph Winds at Full Extension |
| Materials: Tube Steel |  |
| Finish: Powder Coated |  |
| Operation: (2) Manual Crank Winches |  |
|  | |
| Light Head Specs |  |
| Lamp Type: Metal Halide |  |
| Total Wattage: 6,000W (1,000W per lamp) |  |
| Total Lumens: 660,000 (110,000 per lamp) |  |
| Efficiency: 110 Lumens per Watt |  |
| Lighting Configuration: Flood Beam Pattern - NEMA 5X5 |  |
| Run Time: Up To 45 Hours on Single Tank of Fuel |  |
|  | |
| Trailer Specs |  |
| Materials: Steel |  |
| Trailer Dimensions: 14`-L x 8`-W trailer bed | |
| Hitch: 2" Ball Hitch | |
| Wiring: 7-Pin Flat | |
| Axles: 3,500 lbs Leaf Springs | |
| Outriggers: (4) Retractable Outriggers - 1500lb jacks | |
| 3 year warranty replacement on this light mast. The customer ships the failed light mast to Larson Electronics at their expense. If the failure is a manufacturer defect, we will repair and/or replace the unit. |  |
| Made in the USA The WCDE-6MHL-220V mobile light tower from Larson Electronics is a towable lighting package powered by a water cooled diesel engine turning a single bearing 4 pole generator which produces 11,000 watts and 120/240V@60Hz. With six 1,000 watt metal halide lamps producing 660,000 lumens this unit will illuminate a 5-7 acre area continuously without refueling for up to 45 hours. The WCDE-6MHL-220V mobile light tower is a self contained towable light tower package that produces enough light to illuminate an area up to 7 acres in size. This unit contains a water cooled diesel engine powering a 11,000 watt generator, which supplies the current for six 1,000 watt metal halide lamps producing 110,000 lumens each, for a combined total of 660,000 lumens of light. This unit can run uninterrupted for up to 45 hours straight without refueling and includes a telescoping light mast which can elevate the six metal halide lamps to a height of 30 feet. This mobile floodlight package is ideal for emergency services, large scale event illumination, construction, mining, industrial operations and anywhere an extended operation capable mobile lighting solution is needed. |
| Genset: The WCDE-6MHL-220V mobile light tower includes a Kubota Lowboy II GL11000TM genset that houses a Kubota D722 diesel engine that powers the 11KW 120/240V brushless generator. This genset is liquid cooled and features a single phase generator with electric start ignition. The diesel generator runs at 3600 RPM and is equipped with an EPA/CARB Tier 4 emissions system. A 100 gallon fuel cell sits beside the genset and is equipped with an electric fuel delivery system. The fuel cell is constructed of single a heavy gauge steel single wall frame with internal anti-splash baffles. This genset features key operated electric starting, a twelve volt electrical system, liquid cooling, replaceable dry element air cleaner, and a full enclosure for safe operation and protection against the elements. This engine also features cold weather options to improve performance under cold weather conditions. Lights: The lighting system on this unit is comprised of six 1,000 watt metal halide lamps producing 110,000 lumens of light each attached to the end of the telescoping light boom. These floodlights produce a wide flood light pattern capable of illuminating a minimum of 5 acres with a combined total of 660,000 lumens of light. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. The lamps are connected to the power source via a water tight male pin connector that attaches to a receptacle located on the end of the telescoping boom. Telescoping Boom: The telescoping boom consists of three sections extending up to 30 feet through the use of two manual self braking winches and allows for rotating the lights 360 degrees. The telescoping boom is constructed of powder coated steel to resist rusting and corrosion and comes powder coated to prevent friction and rusting between tower sections. This system is capable of withstanding 65 mph winds when extended to its full height and the stabilizing outriggers are deployed. The stabilizing outriggers are a three point design with one located under the trailer tongue and two on the rear sides of the unit. The two rear outriggers are adjustable and include 1500 lbs, swivel jacks for leveling and stabilizing the tower. Wiring/Controls: Each light head is wired into the NEMA 3R breaker control box at the base of the mast. Operators control the light heads via an on/off switched breaker per individual light head. Trailer: The entire unit is mounted onto a two wheel trailer with a 3,500 lbs leaf spring axle and 15†wheels with protected fenders. A standard two inch ball coupling and two standard safety chains allow for easy hookup and towing. The entire unit can be loaded and unloaded onto trucks via forklift sleeves mounted to the outer section of the light mast. |
|  |
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
