Larson Explosion Proof Emergency LED light - 4 foot 2 lamp - 2 Hour Backup Ballast - C1D1 LED Light

PuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.
Made in the USA
The Larson Electronics EPL-2XEMG-48-2L-LED Explosion Proof LED Light Fixture is U.S./Canada UL Listed Class 1 Division 1 &2 and Class 2 Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist.
This explosion proof LED light has a T-6 temperature rating and a carries a paint spray booth light certification as well.
The EPL-2XEMG-48-2L-LED is equipped with Larson Electronics’s specially designed LED T-series bulbs which produce 15% more foot candles of illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. We have replaced two 8 foot dual lamp T8 fixtures in our own facility with our LED T series lamps and produced more illumination in the work area with only one 2 lamp 4 foot long LED fixture. We now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light’s performance.
With an integrated emergency ballast, this explosion proof LED light will continue to operate one bulb for two hours at 2750 lumens once the main electrical power to the light is severed.  Once standard electrical power is restored, the emergency battery pack will be recharged.
We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and the included LEDT-24W LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard T8 bulbs.
The 24 watt LED lamps produce more illumination than standard T8 bulbs, but draw only 3/4 of current. A standard EPL-EMG-48-2L-T8 explosion proof fluorescent light, with a combined total of 64 watts, draws 0.54 amps @ 120 volts. This LED version of the same light, with a total of 48 watts, draws only 0.4 amps. The EPL-2XEMG-48-2L-LED is multi-voltage (universal) and operates on any voltage from 120V to 277V AC 50/60hz. We also make a 12/24VDC version for low voltage applications (-LV suffix) for DC power.
Our EPL-2XEMG-48-2L-LED LED light fixture is U.S. and Canada U.L. approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown below illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the opposite end of the fixture.
Additional mounting options:
Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).
Made in USA Quality
Superior LED Benefits
1. Each unit dielectrically tested.
1. 50,000 hour lifespan.
Specifications / Additional Information
EPL-2XEMG-48-2L-LED Explosion Proof
U.L. Ratings
UL Listing:
United States - Canada
Class 1 Division 1, Groups C and D T6
Dimensions:
W-11.25"  L-52"  H-8.5 "
Class 1 Division 2, Group A,B,C,D
Weight:
45 Lbs
UL 595 Outdoor Marine Type (Saltwater)
Total Watts:
48 watts
UL 844, 924
Voltage:
Universal 120-277VAC 50/60 hz
UL 1598 Marine Type
Low Voltage (Optional):
12/24 Dc power
Class II, Division 1 - 2, Groups E,F,G
LED Lamp Life Expectancy:
50,000+ Hours
UL Certified Canadian Standards
Efficiency:
90 Lumens per Watt
UL listed for Paint Spray Booth Operation
Operating Temp Range:
-30 C to 70 C
California Title 24 Compliant
Beam Angle:
150 degrees
Special Orders- Requirements
Color Temp:
5300K
Contact us for special requirements
Mounting:
Surface Standard - Pendant Optional
Toll Free:
1(647) 254-9757
Wiring Hub:
1/2 inch threaded
Intl:
1-903-270-1187
U.L Approval:
U.S Certificate
Canada Certificate
E-mail:
Contact info@purilite.ca
Scroll Down to Purchase