Hazardous Location Lighting - 400 Watt Metal Halide - Class 1, Division 2 - Pipe/Rail Mount
Hazardous Location Lighting - 400 Watt Metal Halide - Class 1, Division 2 - Pipe/Rail Mount
| HAL-PRM-400W-MH-PM Metal Halide Light Fixture | U.L Ratings |
| Lamp Type: Metal Halide | Class I Division 2 Groups A,B,C,D |
| Dimensions: 25"H x 17"W x 11"D | Class I, Zone 2, Groups llC,llB,llA |
| Watts: 400 | Suitable for Wet Locations |
| Lumens Per Watt: 85 Lm/W | NEMA 4X |
| Voltage: 120-277V/60Hz | IP66 |
| Lighting Configuration: Flood Pattern | Bulb NOT Included |
| Beam Spread: 7 (146°) x 6 (119°) | |
| Mounting: Bar Clamp Mount | |
| Weight: 35 lbs | |
| U.L. Listing: Outdoor Marine Approved | |
| Total Lumens: 34,000 | Toll Free:Â 1-800-369-6671 |
| Wiring: 3/4" NPT Threaded Conduit Entrance | Intl:Â 1-903-270-1187 |
| E-mail:Â |
|
Made in the USA
The HAL-PRM-400W-MH-PM from Larson Electronics is a Metal Halide Hazardous Area Light Fixture with Bar Clamp Mounts that produces 34,000 lumens of light capable of illuminating an area 18,000 square feet in size. Weatherproof and U.L. listed for marine use, this bar clamp mount metal halide fixture is a versatile and ideal exterior lighting solution for both Class I Division 2 Groups A, B, C & D hazardous areas as well as non-hazardous locations.
***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM***
The versatile, multi-use HAL-PRM-400W-MH-PM metal halide fixture from Larson Electronics is weatherproof and suitable for use in outdoor marine applications, making it an ideal lighting solution for industrial applications, boat docks, building exteriors and outdoor work areas. The lamp housing is weatherproof and constructed of die cast aluminum featuring a hinged, removable front-access door with two captive closure screws for easy servicing. The optical assembly includes a precision-formed aluminum reflector and a thermal shock, impact-resistant lens. This metal halide light fixture also features continuous silicon gasketing, corrosion resistant external hardware and a trunnion mounting bracket with stainless steel hardware for angle adjustments and a pair of aluminum bar clamp mounts for mounting.
The aluminum reflector has a chemically bonded, lightweight, non-breakable ALGLAS® finish on both the inside and outside surfaces providing corrosion resistance, durability and ease of cleaning. The optical assembly contains a mogul base socket capable of handling the higher pulse ratings of newer HID systems. Bulb is not included with with this fixture.
This hazardous area light is U.L. rated Class I Division 2, Groups A, B, C & D and suitable for wet locations with IP66 and NEMA 4X ratings. The integral pulse start ballast is protected within the weatherproof housing and operates on 120-277V AC voltages. This lamp is suitable for use in areas where flammable petrochemical vapors are sometimes present. The multi-purpose design of this fixture makes it a popular choice for industrial applications regardless of whether the locations are designated hazardous or not.
This light is highly durable, produces high light output in a wide flood pattern and operates effectively at temperatures to -20 degrees F. Mounting is via an adjustable coated steel trunnion bracket that allows the fixture to be attached to walls or ceilings and provides secure adjustment and positioning. All hardware on this unit is corrosion resistant and the die-cast aluminum exterior has an electro-coat dark bronze paint finish. Wiring is through a convenient wiring box located on the bottom of the heavy duty housing which has a 3/4" NPT conduit entrance.
LAMPS: Use only lamps specified on nameplate. Bulb not included with fixture. Observe lamp manufacturer`s recommendations and restrictions on lamp operation, particularly ballast type, burning position, etc.
Click Here for Installation Instructions
INSTALLATION INSTRUCTIONS This floodlight is provided with a trunnion bracket fitted with two bar clamp mounts for easy mounting on pipes of varying dimensions. The aluminum bar clamp mounts are not adjustable. Instead, operators may choose the size of the pipe they will be installing the light when ordering below. Small machine screws secure the bottom half of the clamps to the top portion. The installer simply removes the bottom portion of the clamps and places the assembly on the rail or bar. The bottom portion is then positioned and secured with the machine screws, cinching the clamp tightly to the bar. An additional set screw at the very bottom of the mount adds additional security for bars that are slightly off size (metric outer diameters).
AIMING: Slightly loosen bolts "A" (two on trunnion) and tilt luminaire to desired position and retighten bolts.
LAMPS: Use only lamps specified on nameplate. Bulb not included with fixture. Observe lamp manufacturer`s recommendations and restrictions on lamp operation, particularly ballast type, burning position, etc.
LAMP TIGHTNESS: Mogul Base Lamp: The lamp should be securely inserted to the NEMA-EEI specified torque of 35 inch-pounds which is best achieved by very firmly tightening to insure application of sufficient torque. Tightening must be sufficient to fully depress and load the center contact of the socket.
WIRING: Make all electrical connections in accordance with the National Electrical Code and any applicable local code requirements. Verify that supply voltage is correct by comparing it to nameplate. Three-conductor No. 14 cable (with 90°C minimum insulation) is recommended for making electrical connections to the P-154. Wiring is accomplished through the wiring box provided on the fixture. The box is provided with a size 3/4" NPT threaded conduit opening. Wiring methods must comply with NFPA 70 (The National Electrical Code), Article 501 for Class I, Division 2 Hazardous (Classified) Locations. To get inside the unit, open the door, loosen the (2) screws holding the reflector and remove the reflector. Verify the correct supply voltage and lamp wattage.
Please Note: This fixture does not include bulb. Please see related items for replacement lamp.
|
||||
| Â |
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
