IND-CDU-AH2-4X24LED-UV365-RPS-M1-120V Ultraviolet LED Light Cart
Ratings/Approvals
Lamp Technology: UV LED
RoHS Compliant
Lamp Qty: (4)
LEDs Driven At 80%
Dimensions: 56"-H 25"-W 19"-D
LED Chip Op Temp -40C to +125C
Weight: -
Lights IP68 Rated Waterproof to 3M
System Voltage: 12V DC
Â
Total Watts: 480W
Â
Single-lamp Watts: 120W
Â
Intensity (Spot): 300 mW/cm² @12" per light
Â
Intensity (Flood): 35 mW/cm² @ 12" per light
Â
Luminous Efficacy: -
Â
Lamp Life: 50,000+ Hours
Â
UV Wavelength: 365 nm
Â
Color Rendering Index: -
Â
Lamp Type: -
Â
Lamp Base: -
Â
Replacement Lamp: -
Â
Beam Angle: 35° Flood or 10° Spot
Â
Lighting Configuration: Flood or Spot Pattern
Optics Efficiency: 90%
Power Factor: -
Master Switch: On/Off per Light
Amps: -
Â
Ambient Operating Temp Range: -40° C to +80°C
Â
Housing Material: Aluminum
Â
Housing Finish: Powder Coated Blue
Lens Material: Polycarbonate
Mounting: Mobile Cart w/ Foldable Arch Frame and (4) 3' to 5' Adjustable Arms
Adjustable Arm/Light Adjustment Range: Vertical, Swivel and Rotate
Battery Charger: 120V AC
Battery Type: 140aH Lithium-ion Battery Pack
'
Product Overview
'
Made in the USA
The IND-CDU-AH2-4X24LED-UV365-RPS-M1-120V Mobile Rechargeable UV LED Paint Curing Cart from Larson Electronics facilitates and supports paint curing in industrial sites. Equipped with four 120-watt UV LED lights on adjustable arms, this paint curing cart produces UV light in the 365nm range. The powder coated blue unit is powered by a 140aH lithium-ion battery pack. All UV LED lights are IP67 rated for protection from water, dust and debris. Designed for vehicles, the UV lamps on adjustable arms are secured to a foldable archway frame. This frame is capable of clearing hoods and truck beds for direct, even light distribution over windshields.
The IND-CDU-AH2-4X24LED-UV365-RPS-M1-120V is an ultraviolet LED light cart for paint curing applications. This battery-powered unit consists of four 120-watt UV LED lights secured on adjustable arms. During use, each LED light produces a 365nm UV beam with a 300 mW/cm² intensity. Each LED lamp has twenty-four, 5-watt ultraviolet emitters arranged in rows and paired with high purity 35-degree optics to produce a wide beam spread for targeting large areas nearer the fixture. We also offer a 10-degree beam configuration to produce a tightly focused spot beam with limited spread or light spillage for more intense beam control. Operators may access on/off master switches for individual light control at the side of the cart.
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the ‘E’ part number designation are designed for extreme durability and are larger and heavier than the standard LEDLB series lights and are nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme.
 35° Flood Beam (Standard)
 10° Spot Beam (Optional)
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
Battery: The IND-CDU-AH2-4X24LED-UV365-RPS-M1-120V is powered by a 140aH lithium-ion battery pack. An included 120V AC battery charger is available for recharging the battery using common 120V outlets.
Adjustable Arms: Located at the top of the archway frame, each LED light can be adjusted independently to provide maximum coverage or maximum intensity. The arms swivel left and right, rotate in up and down positions, as well as can be adjusted vertically (up and down) from 3 feet to 5 feet. The light heads are fitted with trunnion u-bracket mounts, which allow operators to adjust the heads through 270 degrees of tilt.
We offer different arm types and lengths to meet specific project or job requirements (at an additional cost). We can also add more UV lights and batteries for a longer runtime, at an additional cost.
Aluminum Frame Cart: The heavy-duty aluminum cart features bottom-located wheels for mobility around work sites and during windshield replacement, transportation or storage. The cart consists of an adjustable archway frame that can be broken down for compact storage in the back of trucks or cargo vans. When fully assembled, the archway frame is capable of clearing hoods and truck beds, as well as can be rolled up to the front or back of the vehicle for light placement over the windshield. Operators may adjust the height of the frame to suit specific applications. Larger and smaller carts are available at an additional cost.
Suggested Applications: Paint curing, industrial, packaging, automotive, warehouses, manufacturing and more.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
Payment
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Politique de remboursement
Return & Refund Policy
For All non-Larson Products If you are not satisfied with a product, contact us by emailing or call 1-844-787-LITE within 30 days of receipt. A refund may be arranged excluding freight charges upon inspection. Returned merchandise must be shipped in original packaging, freight prepaid, unused, and in resalable condition, and are subject to 25% restocking fee. PuriLite inspects all returns and reserves the right to refuse credits on damaged, used or non-resalable items. Your only obligation is the freight charge and restocking fee, provided your return is complete with original packaging, all documentation, warranty cards, cables etc. PuriLite reserves the right to authorize product returns after 30 days have passed from the order date. If the product is accepted after this period, it is subject to a 25% restocking fee and credit will be issued toward future purchases only.
Shipping and handling charges are non-refundable for all returns. The customer may also be responsible for return shipping charges, insurance and shipment tracking for returned merchandise.
Once you place an order, the following products are non-returnable: custom-cut, customer built or special order items (such as matting, slings, cranes, prefab offices, buildings, mezzanines, assembled lockers and regularly stocked items such as generators, pressure washers, water and trash pumps, snow throwers, radio headsets, striping paint, line stripers, floor care machines, vacuums, custom fabric chairs, forklifts) your order is considered non-cancellable and any custom-cut, customer built or special order items purchased by you are also non-returnable. Consumable style bulbs or lamps are not returnable. There are no returns on any medical and/or sanitizing products for obvious safety reasons. This includes PPE (including masks), tests, thermometers, sprayers and UVC lighting of any kind (portable and surface).
Leased and hazardous items are also non-returnable. Contact customer service for a complete list of applicable products.
Larson product return policy Every order is tested prior to shipping. The product is tested before it is put into the shipping box, crate, pallet, etc. Larson take pictures and videos of every product for every order being shipped, and store these pictures and videos with the order number in our system. Because of the complexity of some of our products, we have a very limited return policy.
For safety reasons, we do not accept returns on any hazardous location, explosion proof or intrinsically safe products. Once these products leave the factory, we cannot be sure what happens to them. We must re-build and re-certify the units to specification to ensure that the next customer receives an item that is safe to use. This is cost prohibitive. For that reason, we do not accept returns on classified products. We do not accept returns on transformers, phase converters, or frequency converters. In order to install one of the aforementioned products, typically customers will modify the product (i.e. penetrate the housing to make connections, punch out knockouts, remove or damage tinning on lead wires during installation). Because we video test every unit before it ships to ensure the unit operates as described, we know when they leave here the units are operationally functional and meet the output voltage when supplied with the input voltage per the product specification. To be clear, we do not accept returns on these items under any circumstances for these reasons.
Products that are not addressed in the above two conditions must be returned in new, unused condition.
Below are some additional considerations:
Electrical/electronic parts are easily damaged by improper installation or testing. Because electronics are very sensitive to voltage overloads, it does not take much of a voltage spike to ruin a component. Because of this risk, all electrical products returned will undergo electrical testing and assessed a testing fee. This fee will be subtracted from the final return value.
Consumable style bulbs or lamps are not returnable.
Products that contain emergency backup components are subject to very narrow warranty terms and do not qualify for return. For customer convenience, we engage the battery pack prior to shipping all emergency backup products. Many times, particularly with hazardous location rated products, the battery packs are difficult to access and the customer generally plans to install the units shortly after receipt of the shipment. Battery backup components using older technologies (Nicad, NIMH, SLA, etc) will fail quickly if they do not maintain valid grid tie support. In other words, the batteries must receive a consistent maintained charge to perpetuate long lifespans. Battery backup products that are shelved (not installed) for periods greater than 3 weeks will likely fail and need replacement sooner. This replacement will not be covered under warranty. This can also occur is the units are installed but the grid tie option is not connected correctly. Customers can specify that they do not want the battery pack to be engaged at the time of ordering if they plan to shelve the units for long periods of time prior to installation.
There are many products on the site and not all pictures depict the exact configuration of each product. Many products are custom built and/or built on demand. In some cases, products are designed and not sold immediately and rendering may be used. In all cases, the end product is built to the specification listed and the pictures shown may be close approximations. Pictures are more likely to be close approximations with more complex products, including transformers, power distribution systems, control systems, light tower systems and other highly customizable products. In no way does the approximation validate a potential return. We always build to the specification. If customers have questions, they should ask prior to purchase to clarify.
There are no returns on any medical and/or sanitizing products for obvious safety reasons. This includes PPE (including masks), tests, thermometers, sprayers and UVC lighting of any kind (portable and surface)
Many international orders, specialty orders and other complex build orders require prepayment in advance. This prepayment represents a commitment to the order. Cancelling the order will result in a deduction from the original amount paid if any refund is available, since an investment of time and money is typically required to acquire materials and prepare the order. While not all orders in this category require prepayment, cancellation fees may apply to other build orders as well. The percentage of the deduction is at Larson’s discretion but usually ranges from 30 to 50%.
How to Return For all returns, you can email us at sales@purilite.ca. You will need the invoice number in the subject line of the email. You can use one of your preferred carriers. Please note that for freight collect shipments, you are responsible for order tracking once the freight is loaded onto the truck. In addition, PuriLite Industrial cannot assist you with filing damage claims with your carrier.
All returns must be authorized by PuriLite. A Return Authorization Number must be obtained from PuriLite Customer Service Department, and the client must provide the Invoice number at the time of the request. The following conditions must be met. Failure to do so could result in refusal of a shipment by us.
At the time of the return, goods must be a stock item with PuriLite and the returned quantity must correspond to the quantity of the original packaging
Approval and shipping destination must be obtained from PuriLite before returning goods;
Goods must be returned to the appropriate location within 10 working days after receiving the return authorization number;
The return authorization number and invoice number must be identified on the return address label;
Goods must be in their original packaging, arrive undamaged and in resalable form
All returns are to be sent prepaid;
Specially ordered goods are non returnable – these products are identified with a part number beginning with a // on quotes and invoices.
Goods damaged in transit must be signed as damaged by the receiver and carrier at the time of receipt of goods in order to request credit from PuriLite.
PuriLite reserves the right to deny any Returns or Claims if the above conditions are not met.
Orders for products affected by x-factor events such as viral outbreaks and other extreme circumstances CANNOT be returned once shipped and billed.