120W Far-UV Excimer Disinfection Fixture - (3) 222nm Lamp - 4-Foot Fixture - L Bracket End Mount - Motion Sensor

LARSON ELECTRONICSSKU: PL3-IND-DHA-FUVC-EX-48-3L-V1-MS
filler

Prix:
Prix réduit$18,290.00
 Plus de moyens de paiement

Description

Specifications / Additional Information
This unit is Made In USA - Manufactured in Texas
IND-DHA-FUVC-EX-48-3L-V1-MS Far UV-C Sanitation Light Fixture Ratings
Unit Type: Far UV-C Germicidal Fixture 222nm Germicidal Light
Lamp Technology: UV Excimer Sanitation Kills 99% of Viruses and Other Germs
Lamp Qty: (3) Mercury Free Lamp
Dimensions: 50.5"L x 7"W x 8"-H Instant-On Lamp, No Warm Up Time
Weight: - More Efficient & Effective than UVC Lamps
Voltage: 120V No Harmful UVC Emissions
Total Watts: 120W No Block Off/Bandpass/Cutoff Filters) Needed
Total UV-C Output: - Skin Safe & Eye Safe
Effective UV Intensity: 40 uW/cm2 @ 1.57" Ozone Free
Expected Lifespan: 10,000+ Hours Low Heat Output
UV Wavelength: Far UV-C, 222nm 360° Motion Sensor
Lamp Type: UV-C Excimer  EPA Reg. No 98409-1
Lamp Base: - EPA Est. No. 98409-TX-1
Replacement Lamp: FRL-EMX-6-40W-FUVC
Beam Angle: 180º
Lighting Configuration: Yes - 360° Auto Shut-Off Motion Sensor
Motion Sensor: Flood Pattern
Power Factor: -  
Operating Temperature Range: - Special Orders - Requirements
Lamp Lens Material: N/A
Housing: Aluminum
Finish: 2-layer Powder Coated Finish - Grey
Mounting: End Mount L-brackets
Cord: -
***PLEASE NOTE: UV-C light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. To prevent exposure, do not operate the device in any application that allows UV-C light to be visible during operation. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating.***
' Product Overview '
This unit is Made In USA - Manufactured in Texas The Larson Electronics IND-DHA-FUVC-EX-48-3L-V1-MS  Far-UV Sanitation Fixture disinfects 99% of viruses, bacteria, mold and spores in locations requiring an aesthetically pleasing germicidal fixture for occupied areas. This eye and skin safe disinfection unit uses three 40-watt excimer lamps that emits far-UV 222 nm germicidal light. Protected by a heavy-duty aluminum housing with a 2-layer powder coated grey finish, the germicidal light features end mount L-brackets. This unit is equipped with a motion sensor that automatically shuts the unit down when motion is detected. *Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria. * The IND-DHA-FUVC-EX-48-3L-V1-MS UV sanitation fixture is a powerful and sleek lighting solution for restaurants, businesses, busy locations and occupied areas. This 40-watt unit consists of three 40-watt excimer lamps that provides 222nm far UV-C output. Equipped with an expected lifespan of 10,000+ hours, the light emits a flood beam pattern. The housing on this sanitation unit is constructed of aluminum with a 2-layer powder coated grey finish for durability. Far-UV 222 nm light is considered to be eye and skin safe for humans, allowing the lamps to be used in occupied areas safely with minimum risk. The 222 nm wavelength does not penetrate the cornea of the eye and cannot impose corneal impairment. Additionally, this UV band is blocked by the top layer of skin (stratum corneum) which protects underlying cells from damage. Exposure to far-UV 222 nm lamp does not cause skin inflammation or swelling. Due to these safety benefits, extensive protective clothing is not required when using this type of sanitation light in occupied areas. Benefits of Excimer Far UV Lamps: When it comes to Far-UV lamps, there are few options in the skin-safe and eye-safe wavelengths. Similar to LED lamps, excimer lamps provide “instant-on” startup, and do not require a warmup period; excimer lamps are at 100% peak output when switched on. Most lamp technologies that do product UVC use mercury in the manufacturing process. Excimer lamps have ZERO mercury, making them more environmentally friendly. Excimer lamps can be tuned to specific wavelengths (222nm wavelength for this product) and produce no harmful UVC radiation or wasteful visible light and infrared light. Excimer lamps are more efficient at converting electricity (input power) into UV irradiance, which reduces the heat output from excimer lamps over other technologies. Fluorescent, amalgam, low-pressure mercury, and high-pressure mercury lamps do not product as tight of a wavelength and generate more heat, both of which wastes energy for the UV sanitation application. Excimer lamps have a higher average UV irradiance per square inch and have a higher photon emission over other lamp technologies. Being safe for use in occupied areas, instant-on power, mercury free, higher UV output, and low heat output make Far-UV excimer lamps the preferred choice for UV sanitation and disinfecting applications. Germicidal excimer lamps emit far-UV 222 nm light that is generated by specific excimer molecules. The far-UV lights come with an expected lifespan of 10,000+ hours. This gas-filled emitter is energy efficient and offers cool operation. A power supply is typically utilized with the non-toxic lamp to ensure consistent UV output. The sanitation light, which is suitable for use in occupied areas, features instant start capabilities. Motion Sensor: This fixture is equipped with a motion sensor for an additional layer of safety while the unit is in use. Due to the potential harm UVC light can cause to a person's skin and vision, it is unsafe to be near the light while it is powered on. To avoid accidental exposure to the UV light produced by this sanitation cart, it is equipped with a 360° motion sensor. When the motion sensor detects movement, it will power off the light. When no motion has been detected for at least 5 minutes, the unit will power back on. Mounting: The far-UV sanitation fixture contains end mount L-brackets for mounting during installation. Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information. Applications: Sanitation, disinfection, restaurants, retail spaces, lobbies, commercial locations, industrial parks, schools, public transportation hubs, airports, office buildings, medical centers and more; kill 99% of viruses, bacteria, mold and spores.

Shipping and delivery Information

Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.

For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.

The PuriLite Peace of Mind 30-day money back guarantee

Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.

1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.

If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.

Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

You may also like

Economisez 11%
Seagate Hard Drive ST18000NM000J 18TB SATA 6Gb/s 7200RPM 256MB 512e/4Kn Bare
Economisez 30%
TP-Link Switch DS116GE Omada 16-Port Gigabit Easy Smart SwitchTP-Link Switch DS116GE Omada 16-Port Gigabit Easy Smart Switch