144W Industrial UVC Fluorescent Fixture - (4) 4' UV T8 Lamps - High Bay UV Sanitation - Motion Sensor
144W Industrial UVC Fluorescent Fixture - (4) 4' UV T8 Lamps - High Bay UV Sanitation - Motion Sensor
| IND-HB-48-4L-UVC-T8-V1 High Bay UVC Sanitation Fixture | Ratings/Approvals |
| Listing: - | (4) 4' T8 UV Fluorescent Lamps |
| Lamp Technology: UV Fluorescent | Germicide Applications |
| Dimensions: 48.06"L x 11.39"W x 3.62"H | Risk Group 3 UV Product |
| Space Between Lamps: - | 360° Motion Sensor |
| Weight: - | EPA Reg. No 98409-1 |
| Lamp Quantity: 4 | EPA Est. No. 98409-TX-1 |
| Voltage: 120-277V AC |  |
| Frequency: 50/60 Hz |  |
| Total Watts: 144W |  |
| Single-lamp Watts: 36W |  |
| Total UV Output (Watts): 59.2W |  |
| Single-lamp UV Output (Watts): 14.8W |  |
| Total Radiant Intensity: 580 uW/cm2 |  |
| Single-lamp Irradiance: 145 uW/cm2 |  |
| Luminous Efficacy: - |  |
| Lamp Life: 8,000 Hours |  |
| Depreciation at Useful Lifetime: 10% |  |
| UV Band: UVC 254nm (200nm - 280nm) |  |
| Peak Wavelength: 280nm |  |
| Color Temperature: - |  |
| Color Rendering Index: - |  |
| Lamp Type: UV T8 Fluorescent |  |
| Lamp Base: G13 (Medium Bi-Pin Fluorescent) |  |
| Replacement Lamp: - |  |
| Beam Angle: - |  |
| Lighting Configuration: Flood Pattern | |
| Motion Sensor: Yes - 360° Auto Shut-Off Motion Sensor | |
| Power Efficiency: - | |
| Power Factor: - | |
| Ballast Quantity: 2 | |
| Ballast Voltage: 120-277 V AC, 50/60 Hz | |
| Amps: - |  |
| Operating Temp Range: -30°C to 85°C | Special Orders - Requirements |
| Housing Material: 22 Gauge Painted Steel | |
| Hardware/Hub Material: - | |
| Mounting: (2) Mounting Holes (Mounting Kits Sold Separately) | |
| Hub Quantity: - | |
| Wiring Hub Size: - | |
| ***PLEASE NOTE: UV-C light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. To prevent exposure, do not operate the device in any application that allows UV-C light to be visible during operation. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating.*** |
| This unit is Made In USA - Manufactured in Texas The IND-HB-48-4L-UVC-T8-V1 from Larson Electronics is a High Bay UV Sanitation Light that provides UVC illumination in industrial facilities in order to sanitize large areas. This 144-watt unit features four, 4-foot T8 UV fluorescent lamps, housed in a 22 gauge painted steel housing. The luminary caters to flat surface mounting mounting and operates on 120-277V AC, 50/60 Hz. This unit is equipped with a motion sensor that automatically shuts the unit down when motion is detected. ***PLEASE NOTE: UV-C light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. To prevent exposure, do not operate the device in any application that allows UV-C light to be visible during operation. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria. * The IND-HB-48-4L-UVC-T8-V1 is a fluorescent-based UV lighting system for industrial facilities requiring effective sanitation or disinfection. Consisting of four, 4-foot T8 fluorescent UV lamps, the 144-watt unit offers 254nm UVC output with a wavelength range of 200nm to 280nm. Each lamp produces 14.8W of UVC output and has a radiant intensity of 145 uW/cm2. This UV fixture operates on 120-277 V AC, 50/60 Hz (ballast voltage) and features a G13 medium bi-pin cap base. The lamp has an 8,000-hour useful lifespan. Operation: The IND-HB-48-4L-UVC-T8-V1 should only be used in non-occupied areas. The UVC radiation produced by this fixture is not safe for skin or eyes. These fixtures should also be set up on a separate circuit from other lighting. It is also advised to use a control circuit that incorporates a motion sensor with groupings of fixtures. This adds a level of safety because the lights will turn off if someone enters the area while the lights are on. The UV light's housing is constructed of 22 gauge painted steel. This UV fixture is a Risk Group 3 UV product. UV radiation from the unit can damage the skin and eyes without proper protection. Operators should avoid exposure to the eyes and skin when the unit is unshielded (for use in enclosed environments only). In the event of lamp breakage, it is recommended to ventilate the room for 30 minutes and clean the area with gloves (not a vacuum cleaner). Contents should be stored in a sealed plastic bag and brought to a waste/recycling facility. Motion Sensor: This fixture is equipped with a motion sensor for an additional layer of safety while the unit is in use. Due to the potential harm UVC light can cause to a person's skin and vision, it is unsafe to be near the light while it is powered on. To avoid accidental exposure to the UV light produced by this sanitation cart, it is equipped with a 360° motion sensor. When the motion sensor detects movement, it will power off the light. When no motion has been detected for at least 5 minutes, the unit will power back on. Mounting/Wiring: The back of the IND-HB-48-4L-UVC-T8-V1 features a pair of mounting holes that can accomodate several different types of mounts. Mounting kits are sold separately. Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information. Applications: Germicidal, water purification, disinfection, food processing, air disinfection, pharmaceuticals, biotechnology and more. |
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
