Infrared LED Light Emitter on Trunnion Mount 750/850/940nm 9-32VDC - 110'L X 45'W IR Beam - 12 Watts

LED Light Bar contains four 6-watt high powered Infrared LEDs providing 12 watts of LED light power, producing 720 lumens of LED light and drawing only 1 amps on 12 volts.  This LED emitter light runs on any voltage ranging from 9 Volts to 32 Volts. With it`s new design to include a U-bracket trunnion mount, this 12 watt LED IR emitter can be mounted on any flat surface while still being able to adjust the angle after installation.  Note that this fixture`s beam can only be seen through the use of night vision goggles. 750Nm, 850Nm or 940Nm versions. Flood configuration is available upon request. BUY AMERICAN COMPLIANT This LED light emitter bar light runs on any voltage ranging from 9 Volts to 32 Volts DC.  This means that you can power this and visible LED emitter light from any vehicle, equipment, ATV or boat electrical system.  You do not need anything special to operate these multi-voltage units, as an internal voltage regulator controls the power to the LEDs.  There is a one foot pigtail attached to the LED light terminated in a 2 pin Deutsch plug.  A wiring harness attaches to the Deutsch socket on the back of the LED light. The harness is terminated in a 2 pin Deutsch plug and includes 20 feet of cable, a relay and a toggle switch that will operate on 12 or 24 volts.  The wiring harness is not necessary for installation. Operators can use existing wiring and switches, assuming they are rated for the amperage listed below.  A hinge style mounting bracket enables the operator to affix one portion of the hinge bracket to the mounting surface.  Then, the operator can set the angle and attach the upper portion of the hinge style mount to the light.  The operator can then adjust the hinge bolt, once the desired angle is set. Spot Beam Optics Angle: 10 degrees (create a narrower, longer, distance oriented beam) Flood Beam Optics Angle: 35 degrees (creates a shorter, wider, diffused beam)      SPECIFICATIONS: Length: 8.75 inches Height: 2.75 inches Depth: 2.5 inches Weight: 3.4 pounds Number of LEDs: 4 Individual LED Watts: 3 watts each LED LED Maximum Lumen Output: 900 lumen per LED LED Type: Seoul P7 Total LED Watts: 12 Watts Volts: Accepts input voltage 9-32 Volts DC Amps: 1 (on 12 volts) .5 amps (on 24 volts) Lumens: 720 total LED Light Color: Infrared CRI:  70 Wavelength: 750nm, 850nm or 940nm Housing Color: black or white available. Specialty colors available on request. Powder coat finish. Housing material: Aluminum Ambient Operating Temperature Range: -45° C to 85° C Storage Temperature Range: -45° C to 100° C Ingress Protection Rating: IP67 (water tight and dust tight) Mean Lens Temperature: 100° F Mean Housing Temperature: 112° F Mounting Type:  Hinge mounting for 180° of possible position angles; Trunnion U-bracket mount for angle adjustability after installation. 3 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.