40 Watt LED Boat Light - 4, 10-Watt LEDs - Adjustable Trunnion Mount - 450'L X 75'W Spot Beam
40 Watt LED Boat Light - 4, 10-Watt LEDs - Adjustable Trunnion Mount - 450'L X 75'W Spot Beam
| LEDPB10W-40ET LED Boat Light Bar | Internal LED Driver Features |
| Lamp Type: CREE XLamp MC-E® LED | Fast average current control |
| Dimensions: 8"-L  2.5"-H  3.5"-D | Programmable off-time switching |
| Watts: 40 | Linear dimming input |
| Led Drive %: 90% | PWM dimming input |
| Voltage: 9-46 VDC | Short protection w/Skip mode |
| Spot Beam: 450`L x 75`W | IP68 Rated |
| Flood Beam: 160`L x 120`W | Ambient Op Temp -40C to +125C |
| Lighting Configuration: 20° Spot or 40° Flood | Pin-compatible with the HV9910B |
| Mounting: Adjustable Trunnion / Inverted U-Bracket | CE Certified |
| Wiring: Deutsch IPD / LADD DT04-2P connector | |
| Amps: 3.34 (on 12 volts) 1.68 amps (on 24 volts) | |
| Lumens: 3,440 | |
| LED Light Color: 6000K | |
| LED Life Expectancy: 50,000 hours | |
| Optics Efficiency: 90% | |
| Materials: Aluminum Housing, Polycarbonate Lens | |
| Housing Colors: Black or White | Toll Free: 1-800-369-6671 |
| Flood Beam: Lux @1 meter= 8,950 @3 meters= 1,225 | Intl: 1-903-270-1187 |
| Spot Beam:Lux @1 meter= 13,750 @3 meters= 1,850 | E-mail: |
Buy American Compliant
The LEDPB10W-40ET LED Boat Light is IP68 Rated waterproof to three meters, features a thick aluminum housing, adjustable trunnion mounting bracket, stainless steel mounting hardware and an impact resistant polycarbonate lens, making it ideal for marine applications where corrosion resistance and durability are critical. 3,440 lumens of light output with low wattage and amp draw, 50,000 hour service life and 9 to 46 volt compatibility provides boat operators with a versatile and powerful LED lighting solution that outperforms halogen marine lamps while using far less power.
The LEDPB10W-40ET trunnion mount LED boat light from Larson Electronics produces 3,440 lumens of bright light while drawing only 40 watts @3.35 amps from a 12 volt electrical system. Four CREE XLamp MC-E® ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam approximately 450’ long by 75’ in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as spreader and area lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the demanding conditions found in marine environments. ÂÂ
An integral Pulse Width Modulation controller, high output, low power requirements, high durability and versatile mounting options makes these LED light emitters a superior lighting solution for boats and marine applications where versatility, extreme durability and efficiency is needed.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle†accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The PWM drivers in these units provide boaters with an extremely versatile lighting option. The pulse width modulation drivers provide the ability to tap into a provided input wire with an external pulse generator and adjust the duty cycle of the current being applied to the LEDs. Thus, you can connect an external dimmer, switch or pulse control and adjust the perceived output of the light, effectively causing the light to flash, dim or brighten to the desired levels. This ability makes these LED fixtures capable of acting as beacons and signal lights as well as all around lighting fixtures.
Additionally, this method of controlling light output results in a corresponding drop in amperage draw, so if the duty cycle is cut back to 50% there will be a matching 50% reduction in amperage draw. These units are also able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP10W series light bars can operate on current ranging from 9 to 46VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in a watecraft`s electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDPB10W series of LED boat light bars from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and sealed against the intrusion of dust, dirt and humidity. The housings are thicker and heavier than standard LED light bars and formed from thick extruded aluminum, the mounting hardware is stainless steel to resist corrosion and oxidation and the lenses are unbreakable polycarbonate. The CREE XLamp MC-E® LEDs offer added resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.
Adjustable Mounting: The trunnion wall mounting design on the LEDP10W-40ET allows for post-installation angle positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp mounting system for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
|
|||||||||||||||||||||||||||||
|
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
