1 1

90 Watt LED Permanent Mount Light - Swivels and Pivots - On/Off Switch - 9-50V DC

90 Watt LED Permanent Mount Light - Swivels and Pivots - On/Off Switch - 9-50V DC

Sold by: LARSON ELECTRONICS

$2,552.00 CAD
$2,552.00 CAD
Promotion Épuisé
Frais d'expédition calculés à l'étape de paiement.
Specifications / Additional Information
PML-90LED-SW LED Spotlight Approvals/Ratings
Lamp Type: Seoul Z-Power LED IP68 Water & Dust Proof
Watts: 90 Watts 8G RMS Vibration Tolerance
Voltage: 9-50V DC 2100` - 6000K Light Beam
Lighting Configuration: Spot or Flood DC Power Options
Mounting: Flat Surface - Adjustable Tensioners Ambient Op Temp -45°C to 85°C
Wiring:Deutsch Connector on Light, Choice of Cigarette Plug 50,000 Hour Service Life
Wiring Options: 16` Cigarette Coil, 16` Cigarette, 21` Ring Terminals, 16` Battery Clamps or 16` Flying Leads Powder Coat Aluminum Body
Amps: 7.5 Amps @ 12VDC
Light Color: 6000K
Lumens: 8100 +/- 400 lumens
Vibration Tolerance: 8G RMS
LED Life Expectancy: 50,000 Hours
Optics Efficiency: 90%
Materials: Aluminum Housing, Polycarbonate Lens
Dimensions, Lamp Only: 5.5"W x 5.5"H x 4.5"D
' Product Overview '
Buy American Compliant The PML-90LED-SW from Larson Electronics is a 90 Watt LED Spotlight that produces 8,100 lumens of intense bright light and offers the versatility of 9-50V DC operation from a compact spotlight profile. This permanent mount LED spotlight is equipped with a rugged polycarbonate control handle and tension hinges that allow the unit to be easily adjusted and set into position and produces a powerful light beam reaching over 2100 feet in length. This 90 watt LED spotlight contains 9, 10-Watt LEDs producing 8,100 lumens of bright white light while drawing only 7.5 Amps on 12 Volts. The light beam from this unit in spot configuration is approximately 2100` long by 140` in width while an optional flood configuration covers an area approximately 1,200 feet long by 450 feet wide. This unit is IP68 rate waterproof to 3 meters, sealed against ingress of dust and dirt and ideal for use in industrial, commercial and private applications. The 4 inch square mounting base has 4 corner bolt holes to keep the spotlight secured to the mounting surface under extreme vibration and off-road conditions. Tension hinges incorporated into the mounting assembly allow the light to hold its position once adjusted without the need to set or lock any hardware before releasing the adjusting handle. The operator simply adjusts the unit to the desired position and releases it to set the unit into position. This unit includes a heavy duty switch mounted on the light housing for on/off operations.
This image shows a dark street with no illumination but the distant street lights   This image shows the PML-90LED-SW illuminating the street.
 
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Durability:This series of LED light bars from Larson Electronics offers IP68 rated construction that is designed to withstand demanding environmental and operating conditions. These units can withstand frigid temperatures, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housing on this unit is formed from cast aluminum, the control handle is solid polycarbonate and the lens is unbreakable polycarbonate. The Seoul Z-Power LEDs offer excellent resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. Mounting: This light has a 4 inch square steel mounting plate that is secured to the mounting surface via 4 screws. The mounting assembly on this unit allows the unit to be rotated and adjusted vertically. The adjusting hinges on this light are tensioned, allowing the user to simply position the light as desired without any need for locking the unit into place. Once positioned, the light will hold its position until the user again repositions it.
PML-90LED-SW 35° Flood Beam PML-90LED-SW 10° Wide Spot Beam
Power: This light can be operated on low voltage 9-50 volt DC current and includes a cigarette plug. The light assembly can be directly to any 9-50V DC power source simply by connecting the unit to the 9-50VDC volt power supply. These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range and as a result can operate on current ranging from 9 to 50VDC without any modifications necessary.
16ft Coil Cord w/Cigarette Plug 21ft Cord with Ring Terminals 16ft Cord w/Battery Clamps 16ft Cord with Cigarette Plug
Click Images to Enlarge
Wiring: Each light comes with a detachable 16 foot coil cord with cigarette plug. The cord is detached via a weatherproof, 2 pin Deutsch connector which easily and securely attaches and detaches the coil cord from the spotlight. Other cords, including 21 foot cords with ring terminals (C-21RT), 16 foot cord with spring battery clamps (alligator clips) (C-16BC) and a 16 foot straight cord with cigarette plug (C-16CP) are available. This light can be ordered in either 12 volt or 24 volt configuration, allowing it to be used with any vehicle or ATV equipped with a cigarette plug. Choose voltage below when ordering.  

Shipping and delivery Information

Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.

For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.

The PuriLite Peace of Mind 30-day money back guarantee

Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.

1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.

If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.

Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!

Sustainability & Ethical Sourcing

At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.

♻️ Sustainable Practices

  • We prioritize durable materials that extend the product life cycle and reduce waste.
  • Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
  • Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.

🤝 Ethical Sourcing

  • We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
  • All suppliers are carefully vetted for compliance with environmental and ethical standards.
  • We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.

🌍 Our Ongoing Commitment

We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.

Afficher tous les détails
Produit Sous-total des produits Quantité Prix Sous-total des produits
90 Watt LED Permanent Mount Light - Swivels and Pivots - On/Off Switch - 9-50V DC
90 Watt LED Permanent Mount Light - Swivels and Pivots - On/Off Switch - 9-50V DCPL3-PML-90LED-SW
90 Watt LED Permanent Mount Light - Swivels and Pivots - On/Off Switch - 9-50V DCPL3-PML-90LED-SW
$2,552.00/pièce		 $0.00
$2,552.00/pièce $0.00