1 1

Diesel Engine Powered Light Tower- 25' Mast - 6kW Generator - (4) LED Fixtures

Diesel Engine Powered Light Tower- 25' Mast - 6kW Generator - (4) LED Fixtures

$98,548.00 CAD
$98,548.00 CAD
Promotion Épuisé
Frais d'expédition calculés à l'étape de paiement.
Specifications / Additional Information
WCDE-4-6KW-25-EW-4X250LTL-M1 Mobile LED Light Plant Summary
Genset Specs: 6KW Kubota Brushless Genset
Engine: Kubota D1105 45.8 Gallon Fuel Cell
Fuel Type: Diesel Up to 136.9+ Hours Continuous Operation
Engine Speed: 1800 RPM External Grounding
No. of Cylinders: 3 Low Oil, High Engine Temp Auto Shut-Off
Exhaust Rating: EPA Tier 4 Hour Meter - Alternator Warning
Displacement: 1.12L High Output LED Lamps
Horsepower: 15.4 Extreme Area Coverage
Noise Level: 68 dBA @ 23' (7m) Direct Replacement for (4) 1000W MH Light Plants
Engine Cooling: Liquid Cooled 129,600 Total Lumen Output
Air filter: Dry Type Cartridge Independently Adjustable Light Heads
Ambient Operating Temp: 120°F (49°C) Ambient Individual Light Switch Circuit Breakers
Oil filter: Full Flow, Spin-on Type, 1,000-hr Service Interval Dial-in Adjustability per light head
Alternator: Marathon Electric® Brushless 98% Transmission High Purity PMMA Optics
Kilowatt Rating: 6 kW Multiple LED Banks for Heat Dispersion
Voltage: 120/240 VAC 70% Lumen Retention after 80,000 Hours
Max Amperage: 50A (120V) / 25A (240V) IP67 Waterproof LED Fixtures
Voltage Regulation: ± 6% Capacitor  Steel Trailer w/ Industrial Grade Paint Finish
Fuel Tank Capacity: 45.8 gal (173.37 L) Usable Fuel Volume Withstands 65Mph Winds at Full Extension
Fuel Tank Material: Polyethylene  
Fuel consumption (Prime Load): 0.68 gal/h  
Runtime (100% Prime Load): 64.3h  
Runtime (Lights Only): 136.9h  
   
System Controls/Electrical Specs:  
Engine Battery: 440 CCA Wet Cell Battery  
Main Breaker: 40A Start Trip Breaker (Ensures No-load Condition Exists at Start-up)  
Flood Light Breakers: (4) 15A Breakers  
Lamp Indicator Lights: (4) Green "On" Indicator Lights  
Breakers: (2) 20A 1P [120V], (1) 30A 2P [240V]  
Receptacles: (2) 20A 5-20R Duplex [120V, GFCI], (1) 30A L5-30R [240V]  
Lamp Controls: Digital Zone Controller  
Noise Level: 68 dBA @ 23' (7m)  
System Switch: Engraved, Aluminum Punched and Anodized Control Panel 4-position Key Activated Switch (off, run, glow, start)  
System Meter: Digital Hour Meter  
Protection:Automatic Low Oil/High Temperature Shutdown System  
   
Light Mast Specs:  
Mast Orientation: Vertical  
Mast Height: 25 ft. (7.62 m)   
Mast Stage Qty: 5  
Mast Material: Steel  
Mast Finish: Galvanized  
Mast Rotation: 359° Ground-level Rotation with Locking System  
Wind Rating: 65 mph (105 kph)  
Winch Type: (2) 1500lb, Self-Braking  
Winch Rating: 950 lb. (430.91 kg)    
Wiring: Coiled Mast Cord  
   
LED Light Specs:  
Lamp Type: Cree® LED  
Lamp Qty: (4)  
Total Watts: 960W
Single-lamp Watts: 240W
Total Lumens: 129,600
Single-lamp Lumens: 32,400
Luminous Efficiency: 135 Lm/W
Coverage: @ 0.296 at 5ft. candles
LED Life Expectancy: 80,000 hours
Lamp Materials: Aluminum Housing, Individual Polycarbonate Lenses w/ Silicone Gasket O-rings
Lamp Adjustment: Friction Disc Mounting for Tool-less Positioning w/ Distinctive Angle Fixture Design for Consistent Light Distribution
Lamp Controls: Individual On/Off Switches
 
Enclosure Specs:
Enclosure Material: Steel
Enclosure Thickness: 14-gauge
Enclosure Finish: UV & Fade Resistant, High Temperature Cured, White Polyester Powder Paint
Hinge Material: Stainless Steel
Transport Assist: Single Lifting Eye and Fork Skid Pockets  
License plate Mount: USA Standard Holder with License Plate Light  
Labeling: Multi-lingual Operating/Safety Decals (English/Spanish)  
Interior Sleeves: Manual Holder with Operating Manual  
   
Trailer Specs:  
Platform: Front Step Platform for Easy Adjustment of Light Fixtures  
Tongue: Removable Tongue 48 in. (1219.20 mm) Long  
Leveling Jacks: Industrial Grade Paint  
Axle: (4) 2000 lb. (907.18 kg) Adjustable Leveling Jacks 4 point Stance  
Jack Position: All Jacks Transport and Lock In Horizontal Position for Storage  
Side Outriggers: 140 in. (3.56m) Span  
Hitch: 2 in. (50.8 mm) Ball Hitch  
Fenders: Single Wall Polyethylene Fenders  
Trailer Lights: DOT Approved Tail, Side, Brake, and Directional Lights; Recessed Rear Lights  
Leaf Spring Axle: 2200 lb. (997.90 kg)
Wheels: ST175/80D13 - 6 Ply
Axle Span: 56 in. (1422.4 mm)
  Int'l: 1-214-616-6180
Dimensions: -
Shipping Weight: -
' Product Overview '
Made in the USA The WCDE-4-6KW-25-EW-4X250LTL-M1 mobile light tower from Larson Electronics is a towable, self-contained LED light plant powered by a water cooled diesel engine which produces 6,000 watts at 120/240V @ 60Hz. The four 240 watt LED lamps included with this unit produce a combined total of 129,600 lumens, which can illuminate a 3-4 acre area. The trailer mounted light tower and generator set comes equipped with a 45.8-gallon fuel tank that will run continuously without refueling for up to 136.9 consecutive hours. The WCDE-4-6KW-25-EW-4X250LTL-M1 mobile light tower is a self-contained towable light tower package that produces enough light to illuminate an area up to 4 acres in size. This unit contains a water cooled diesel engine powering a 6,000 watt generator, which supplies the current to four 240-watt LED lamps producing 32,400 lumens each for a combined total of 129,600 lumens of light. This unit can run uninterrupted for 136.9 hours straight without refueling and includes a telescoping light mast which can elevate the four LED lamps to a height of 25 feet. This mobile floodlight package is ideal for emergency services, large scale event illumination, construction, mining, industrial operations and anywhere an extended operation capable mobile lighting solution is needed.
Generator: The 6kVA generator is powered by a three-cylinder diesel engine and offers 120/240V AC (50A - 120V/25A - 240V max amps). Breaker-protected receptacles include: (2) 20A 5-20R duplex [120V, GFCI] and (1) 30A L5-30R [240V]. Equipped with a 45.8-gallon polyethylene fuel tank, the system offers up to 136.8 hours of runtime (lights only). Lights: The lighting system on this unit is comprised of four 240-watt LED lamps producing 32,400 lumens of light each attached to the end of the telescoping light boom. These floodlights produce a wide flood light pattern capable of illuminating 4 acres with a combined total of 129,600 lumens of light. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. The lamps are connected to the power source via a water tight male pin connector that attaches to a receptacle located on the end of the telescoping boom. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours. In addition, should an LED failure occur, these LED flood lights are field serviceable. Each bank of six LEDs can be replaced with the fixture installed. This allows for the tower to stay in operation until repairs can take place, and eliminates the need to remove and disassemble the entire fixture for repairs. Durability: As well as unparalleled heat control, the GAU-LTL series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree® LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,000 hours of use. We use these LED lights for applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Controls: The operations system for this unit is a centrally located control panel located within the light tower enclosure. An engraved, aluminum punched and anodized control panel 4-position key activated switch (off, run, glow, start) is available with the light tower. This unit includes a digital hour meter and automatic low oil/high temperature shutdown system. Telescoping Boom: The telescoping boom consists of three sections extending up to 25 feet through the use of two manual self braking winches and allows for rotating the lights 360 degrees. One winch is mounted to the trailer tongue and acts to raise the tower into a vertical position while the other is mounted to the boom and is used to extend the tower to the desired height. The telescoping boom is constructed of galvanized steel to resist rusting and corrosion and comes powder coated to prevent friction and rusting between tower sections. This system is capable of withstanding 65 mph winds when extended to its full height and the stabilizing outriggers are deployed. Housing: All of the operating components are housed with a protective compartment constructed of 14 gauge steel and designed to provide airflow for cooling. Side doors provide access to the interior while latches provide secure closing while the unit is in use. The design and construction of this enclosure along with the commercial grade muffler system helps this unit operate at a low 68 Db level @ 23 ft. Trailer: The entire unit is mounted onto a two wheel trailer with a 2,200 lbs leaf spring axle and wheels with protected fenders. A standard two inch ball coupling and 7,800 lbs standard safety chains allow for easy hookup and towing. The entire unit can be loaded and unloaded onto trucks via forklift sleeves mounted to the outer section of the light mast. Mobile Portable Light Tower Specifications Engine System: - Kubota D1105 - Diesel fueled - EPA Tier 4 - 3 cylinder - 1.12 L displacement - Liquid cooled - Power@ 1,800 rpm -HP (kW) Fuel System: - Polyethylene tank -45.8 gal (173.37 L) usable fuel volume - Operating performance HP: 15.4 - Fuel consumption (Prime Load) US gal/h: 0.68 - Runtime 100% Prime Load h: 64.3 - Runtime 4 Lights Only h: 136.9 Lubrication System: - Oil filter: Full flow, spin-on type - 1,000-hr service interval Generator: - 60 Hz engine/generator - Marathon Electric® brushless - Up to 6 kW output - 120/240 VAC, 50/25 A - ± 6% capacitor voltage regulation Cooling System: - Air filter: Dry type cartridge - Cooling system capable of operating at 120°F (49°C) ambient Floodlights: - Four (4) 240 watt LED - Lm/bare bulb: >22,000 - Lm/fixture: >88,000 - Total bare bulb Im: >22,000 - Total fixture Im: >88,000 - Efficiency: >120 LPW - Coverage: @ 0.296 at 5ft. candles - Aluminum reflector - Polycarbonate lens - Silicone gaskets for moisture and dust protection - Friction disc mounting for tool less positioning - Individual floodlight On/Off switches Controls: - Engraved, aluminum punched and anodized control panel - 4-position key activated switch (off, run, glow, start) - Digital hour meter - Automatic 'I0w oil/high temperature shutdown system Electrical System: - 40A start trip breaker (ensures no-load condition exists at start-up) - Floodlight circuits with sealed 15A breakers - Ballast Indicator lights - Convenience receptacles with individual breakers: - (2) 120 VAC 20 Amp GFCI duplex outlets (NEMA 5-20R type) - (1) 240 VAC, 30 A, twist lock outlet (NEMA L6-30R type) - 440CCA CCA wet cell battery Enclosure: - Steel enclosure -14-gauge - UV & fade resistant, high temperature cured, white polyester powder paint - 68 dB (A) at 23 ft. (7 m) -prime power - Stainless steel hinges on doors - Multi-lingual operating/safety decals - License plate holder with light - Manual holder with operating manual - Equipped with single lifting eye and fork pockets Mast: - Wind Rating: 65 mph (105 kph) - Vertical mast; 25 ft. (7.62 m) maximum extension, 5-section tubular steel frame - Distinctive angle fixture design for consistent light distribution - Electric winch standard - 950 lb. (430.91 kg) self-breaking winch -easily raises mast vertically - 359° ground-level rotation with locking system - Coiled mast cord Trailer: - Front step platform for easy adjustment of light fixtures - Removable tongue -48 in. (1219.20 mm) long - (4) 2000 lb. (907.18 kg) adjustable leveling jacks -4 point stance - All jacks transport and lock in horizontal position for storage - Side outriggers -140 in. (3.56 m) span - 7800 lb. (3538 kg) safety chains with spring loaded safety hooks - 2 in. (50.8 mm) ball hitch - Single wall polyethylene fenders - DOT approved tail, side, brake, and directional lights - Recessed rear lights - 2200 lb. (997.90 kg) leaf spring axle - ST175/80D13 - 6 ply - 56 in. (1422.4 mm) axle span Options: - Digital Power Zone Controller  

Shipping and delivery Information

Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.

For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.

The PuriLite Peace of Mind 30-day money back guarantee

Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.

1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.

If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.

Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!

Sustainability & Ethical Sourcing

At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.

♻️ Sustainable Practices

  • We prioritize durable materials that extend the product life cycle and reduce waste.
  • Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
  • Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.

🤝 Ethical Sourcing

  • We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
  • All suppliers are carefully vetted for compliance with environmental and ethical standards.
  • We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.

🌍 Our Ongoing Commitment

We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.

Afficher tous les détails
Produit Sous-total des produits Quantité Prix Sous-total des produits
Diesel Engine Powered Light Tower- 25' Mast - 6kW Generator - (4) LED Fixtures
Diesel Engine Powered Light Tower- 25' Mast - 6kW Generator - (4) LED FixturesPL3-WCDE-4-6KW-25-EW-4X250LTL-M1
Diesel Engine Powered Light Tower- 25' Mast - 6kW Generator - (4) LED FixturesPL3-WCDE-4-6KW-25-EW-4X250LTL-M1
$98,548.00/pièce		 $0.00
Épuisé
$98,548.00/pièce $0.00